1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Drivers side vibration. (Already converted to the ECGS bushing)

Discussion in '2nd Gen. Tacomas (2005-2015)' started by glennv, Jul 15, 2015.

  1. Jul 15, 2015 at 1:26 PM
    #1
    glennv

    glennv [OP] Well-Known Member

    Joined:
    Apr 16, 2009
    Member:
    #16065
    Messages:
    194
    Gender:
    Male
    I've got an 09 with about 100k on it. Has the typical vib after I lifted it about 50k ago so I did the ECGS bushing conversion and it corrected the problem.

    For about 8 months I've had a vib that is very similar to the one I had before I did the conversion. Same feeling in the gas pedal but does not go away after I put the truck in 4WD nor does it stop after I take my foot off the gas.

    Here is a video of both CV shafts at the diff. The first one is the driver's side and has quite a bit of play. Is it possible that the c clip popped off?



     
    Last edited: Jul 28, 2015
  2. Jul 28, 2015 at 5:10 PM
    #2
    glennv

    glennv [OP] Well-Known Member

    Joined:
    Apr 16, 2009
    Member:
    #16065
    Messages:
    194
    Gender:
    Male
    Added a video of both cv shafts. I know some have said the driver's side should have more play that the passenger but should it have that much? As stated in the initial post, I've had the ECGS bushing in for a couple of years. Any thoughts?
     

Products Discussed in

To Top