*THE RTT Owners Thread (With BS)*

Hey guys how much work does it take to install the tent on the roof? I'm looking for a time frame for 2 guys to mount it up to be ready for travel.

Also, those of you with Prinsu Racks. Are the stock bolts and mounting plates a good size to go around the cross bars?

 

First time. A couple hours. Much less after its all together to get it on and off 5 min with 2 people by hand. I leave it on my prinsu bars and just take off the 2 bars holding to the rack and lift off.

 

That's a great idea. I'm gonna do that. Did the stock bolts for your rack? And do you worry about somebody doing that and stealing your tent?

Getting closer to being ready to go!

 

I like to recommend that people replace the nuts that hold the rails to the tent. When i took mine off my old rack to build the new one 3 out of the 4 bolts had completely backed out of the locknuts. I like to recommend distorted thread nuts. I used these, they fit in the groove just like the originals. I don't know if they are the same thread as the provided bolts as the threads on mine were destroyed from the tent bouncing back and force unsecured and jacked up the holes in the tent as well. http://www.mcmaster.com/mv1437769867/#93795a220/=y9b0su

 

Yep original hardware for now. May switch out later.

Not worried about anyone taking it. I live in the middle of nowhere. And my work lot is safe. Other than that I don't really leave my truck in sketch places.

 

Paging Tepui Rep!!!

Anyone know if the Kukenam sky comes in Ruggedized? I have the Kukenam Sky right now, but should probably upgrade to the rugged version; just not sure I want to give up my Sky-lights.

 

As far as I know, Kukenam sky does not come in Ruggedized version. WWW.tepuitents.com.

 

ya I looked over the website, I was hoping they maybe forgot to add it

 

Glws, and where's that third pic taken? Looks like a nice spot!

 

There is not currently a Ruggedized Sky model for any of the Tepui tents.

 

Thanks! ...above Big Sur / Plasket area.... now looking back at those - maybe i don't want to sell it so bad!

 

Big thanks to @ecriv for bringing this bad boy my place and putting it on my new to me trailer! Guess I can now be a RTT club member

 

Nice! Happy to see it in a good home. That Trailer is going to be sick.

 

Awesome. Now let's talk about some linear actuators to raise the screen for the projector for movies out in the desert and figure out where to mount the popcorn machine and pizza oven.

 

I have a CVT RTT and lost/ Didn't come with the tent.... Can someone please post the length of the window rods? I need to make something work for camping this weekend and doubt my new rods will be come in time to take camping. pics and dimensions of the window rods would be greatly appreciated!!

 

Could the window spring rods be in a hidden tent pocket? anyone seen this?

 

Check under the mattress

 

I did I take the mattress out during storage. I will double check later though. Thank you! Any help is good.

 

Couple pics from our trip this past week.