Help on 5100 lift kit install

Installing the bilatein 5100 . Can anyone tell me where these bolts goes . Thanks

 

think those are the skid plate spacers/bolts

 

Thanks buddy

 

What about this part ?

 

goes on rear brake proportioning valve.

 

Thanks for help. The kit don't come with instructions

 

Is the rear break line normal like this ?

 

Not good. Lift blocks lifted spring too high. Remove them and find another way to lift the rear.

 

^^^ yup not going to have a park brake with those blocks. Even if it did work id tell you to remove the blocks as these trucks have bad enough axle wrap as it is. looks like your leafs dont have much life in them anyways so id buy a new leaf pack or put in an aal.

 

Thanks guys . I think I'm going to get extended rear brakes brackets

 

Like this

 

Blocks are lame! Shackles, AAL's or a brand new leaf pack. It's worth it if you plan on keeping the truck.

 

I'm going to get the new leaf pack soon.

 

I have the same adjustable Bilstein/ Eibach coil lift with 1.5" AAL's and 5100's in the rear.

 

The aal just bolts right on with no problem with the rear break line ?

 

clean looking truck anyways.

 

yup.

 

Easily done!

 

That cable can be disconnected and run under the leaf pack. That block is the perfect height to be right in the way hu? Block might not be tall enough for the cable not to rub/toutch routing it under though either...

 

My brake cable ran right across over the leaf pack across the Diff where that relocation plate is at that you have to install. No trouble at all