Hello.. This is Manny from Miami..

I have an easy solution for installing a K&N filter..

 

Keeping your stock intake and filter housing.. Just making a few modes to it and easy.. Cutting 2 holes with mesh in the stock box and taking out the Resonator. . It made a huge difference. .

 

I read a couple of conversations about having a K&N filter. I've read that some people lost horse power or just making a nice sound.. Mine doesn't really make much sound. I guess because of the stock rubber or plastic intake system.. I tried l leaving the most "Stock" possible.. This helped a lot.. I can have my A/c on and not feel a difference. . It's perfect.. My 2015 Tacoma is a 5 Speed.. In the photo you can see all I did by taking out the Resonator was that I cut and installed a Metal plate to cover the hole and drilled another Little hole for the vacuum hose..

 

Welcome!Mod on!

 

2.75 Leveling Kit with 255/75 R17's The tires mesure 32". Rims from a 2008 Chrysler 300 Stock

 

These are 2 metal block plates by the back side of the front fender wall.. As you can see I cut out part of the plastic where they were originally mounted.. This is how I was able to fit 32" tires.. 255/75 R17's The only part that rubs very little is on the stability bar.. No big deal.. Only when you turn all the way.. My 5 Lug 2.7 L is running Great!