Keystone State Thread

2nd gen. Kinda popped up right in front of me driving opposite ways, no time for photo.

 

Ryan I have a set of 2nd gen factory uca's. The one probably needs a ball joint because the stud got messed up when I took the nut off. Idk if it helps you or not but I have s set laying around

 

It doesn't thanks though.

 

Just did my last oil change on the ol' truck - as I don't plan on owning this truck in the next 6 months. Frame replacement coming in Oct and took some things off the truck to prep for that.......

Anyone interested in a pair of PIAA540 yellow fogs and an Aries bullbar? This is what they looked like 'new'.
I have current photos (just not on the truck). Let me know. Willing to sell as a package or separate.
http://www.lieblweb.com/cpg/albums/ToyotaTacoma/2007Tacoma/normal_PIAA540.jpg

 

How much for both?

 

I might still have mine. 25k on them. All southern and California miles

 

Are they for a 1st gen?

 

I'll send you a PM so I don't clog up the thread (photos).
They're both about 8 years old. The PIAA's look really good and rust free. The bull bar could use some buffing and/or a respray. A couple spots are bubbled up a bit.
I don't want ship this stuff...It could get expensive to ship (size/weight).

 

Actually will that bull bar fit 2012-2015s. Mine is a 13

 

Crap. Didn't look at that. Second gen. Got mixed up with the posts sorry

 

No problem

 

I have no idea...... when I un-installed it, the bracket uses factory bolts on an alluminum block (5" thick approx) that's attached to the frame. The frame would be the same, but the aluminum block could be different considering you have a different front end.

 

Hmm I'll have to do a little research. I'm definitely interested tho. But I don't know about the 4 hour drive or so to get it......

 

Going to have to do a little research and see what years fit what. But I'm definitely interested but idk about the 4 hour ish drive out there from Pittsburgh tho.....

 

Are there any part numbers stamped on the bull bar itself. It's an Aries so there should be

 

Looks like this is it, but still check and see if u can find any part numbers stamped on it. Thanks!!!!

Aries P35-2002 Pro Series 3" Textured Black Finish Bull Bar

ARIES P35-2002 Pro Series 3" Offroad Black Steel Bull Bar, Select Toyota Tacoma

https://www.amazon.com/dp/B00B1CLSZM/ref=cm_sw_r_awd_QjC7vbZ8F8GWK

 

I hear ya.....that's a lot of gas. No worries...Just thought I'd give you first shot. Let me know what you think so I can post this up to the others. Thanks!

Couldn't locate any part numbers....

 

I'm still interested in driving out of ya come down on the price a little cause it will cost me 29 to run out the turnpike plus gas.

 

Think u could holt up a bracket and take some pics and I'll see if it will match up with my truck?

 

I'll take a picture of the 'aluminum block' that it bolts to, but I'm not going to bolt the brackets back on.