2014 Non-JBL stereo wiring harness?!!

I have been looking for an answer through these forums, but can't find it yet.

I am looking for a wiring harness for my non-JBL, non-navigation Entune stereo to run a LOC and amps without cutting in the harness. I have found various harnesses on Amazon and Ebay, but none that are specifically for a 2014. Short of ordering a couple and pulling the dash apart, can anyone please point me to a harness that will work? One that will provide speaker outs and a power out for a remote on/off switch? Thanks!!

 

these are what I used. http://www.ebay.com/itm/TOYOTA-PLUG...?fits=Make:Toyota&hash=item3f2cd1f48c&vxp=mtr

http://www.ebay.com/itm/TOYOTA-LEXU...?fits=Make:Toyota&hash=item4d2be9d71d&vxp=mtr

 

Thanks! I just wanted to make sure it worked okay. Ordered the same cable but from some other vendor.

 

Sorry to highjack your thread but I have a question for the OP. I picked your thread because your doing what I did.

I messed around with adding an amp I to my door speakers and then removed it. Then added an amp for subs which I still have.
I can't remember before I did all of this if the stock radios buttons lit up along the sides or not. Because mine aren't and I want to make sure they are supposed to before I take it to the dealership.

If you could let me know it would be greatly appreciated.

 

Honestly I don't remember if they do or don't. I want to say I don't think they do, but I will need to check my truck out today and let you know.

 

They're supposed to light up. The factory radio has a wire that turns the lights on when you turn your headlights on.

 

I just posted a "how to" to fix this for you assuming you used the same stuff I did. https://www.tacomaworld.com/threads...lights-on-oem-radio-after-loc-install.394575/

 

I will give that a try in a few weeks. Thanks a lot!