1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Non-OEM Replacement Lower Control Arms

Discussion in '2nd Gen. Tacomas (2005-2015)' started by ItalynStylion, Oct 6, 2015.

  1. Oct 6, 2015 at 6:25 AM
    #1
    ItalynStylion

    ItalynStylion [OP] Sounds Gooooood

    Joined:
    Jun 15, 2009
    Member:
    #18467
    Messages:
    5,926
    Gender:
    Male
    First Name:
    Steven
    DFW, Tx.
    Vehicle:
    09 Double Cab TRD Sport 4x4
    Long story short, I THINK I have a lower ball joint that appears to be on it's way out. No noises or performance changes yet, but I'm planning to keep the truck for a lot longer so I'm trying to figure out what I'll do when the time comes it needs to be replaced.

    From the research I've done, it seems replacing the ball joint itself is fairly retarded. Plus, the bushings in that control arm are 109k miles old. That brings us to the fairly accepted solution of just replacing the control arm as a whole which freshens up the ball joint itself and the bushings. Two birds, one stone.

    OEM lower control arms are about $400 but I keep finding non-OEM parts that are VERY reasonable. Has anyone tried a non-OEM lower control arm? Is there any reason why I shouldn't? From what I can tell, the geometry is pretty much the same and the only moving part is the ball joint itself. The OEM piece is welded plate steel anyway so it's not an uber complicated piece...

    Here's a couple examples...
    http://www.partsgeek.com/gbproducts...SO09x7C7_lSlwkSgAfXTNvHmzWfbox8Ua2RoCd2jw_wcB
    http://www.amazon.com/Dorman-522-71...7161&sr=8-1&keywords=tacoma+lower+control+arm
    http://www.amazon.com/Mevotech-MS86...7161&sr=8-7&keywords=tacoma+lower+control+arm
     
    ChadsPride likes this.
  2. Oct 7, 2015 at 6:14 AM
    #2
    ItalynStylion

    ItalynStylion [OP] Sounds Gooooood

    Joined:
    Jun 15, 2009
    Member:
    #18467
    Messages:
    5,926
    Gender:
    Male
    First Name:
    Steven
    DFW, Tx.
    Vehicle:
    09 Double Cab TRD Sport 4x4
    Bump for people with experience. Hoping someone else has branched out and tried one of these. :D
     
    ChadsPride likes this.
  3. Oct 7, 2015 at 6:25 AM
    #3
    Just Dandee

    Just Dandee Well-Known Member

    Joined:
    Mar 5, 2015
    Member:
    #150227
    Messages:
    607
    Gender:
    Male
    First Name:
    Dan
    Southwest Idaho
    Vehicle:
    2015 TRD OR
    Supercharged-2.5 lift-255/85/16
    No experience on the Toyota but I would not shy away from using something other than Toyota parts. I am replacing all the parts on a 66 mustang right now and I know the moog parts (new lower control arm) I got are first class replacements. When I was a parts guy way back ...Beck Arnley was a good name too.

    https://www.rockauto.com/catalog/x,carcode,1442967,parttype,10401
     
    ChadsPride likes this.
  4. Oct 7, 2015 at 6:32 AM
    #4
    ItalynStylion

    ItalynStylion [OP] Sounds Gooooood

    Joined:
    Jun 15, 2009
    Member:
    #18467
    Messages:
    5,926
    Gender:
    Male
    First Name:
    Steven
    DFW, Tx.
    Vehicle:
    09 Double Cab TRD Sport 4x4
    Thanks for the response!

    I've been eyeing the Doorman and Moog replacements. Both seem quite nice. I know Moog seems to be the name in ball joint replacements but the Doorman really seems like a quality part. I think I may give it a go. Shit, for $220 replaced on my own that seems like a killer deal.
     
    ChadsPride likes this.
  5. Oct 28, 2015 at 11:16 AM
    #5
    ItalynStylion

    ItalynStylion [OP] Sounds Gooooood

    Joined:
    Jun 15, 2009
    Member:
    #18467
    Messages:
    5,926
    Gender:
    Male
    First Name:
    Steven
    DFW, Tx.
    Vehicle:
    09 Double Cab TRD Sport 4x4
    I decided to go for it and ordered the non-OEM control arms from Rock Auto. I decided that since they were so reasonable I'd get both the left and right side. I replaced the bad one last night and got the truck aligned this morning. Everything went well with the installation and the truck seems to behave just fine. Obviously, longevity remains to be seen but the replacement looked like a quality part. Pictures of the old one and the new one are below.

    Also, it should be noted that I think the ball joint itself was likely fine but was going to fail in the future due to the boot being toast.

    BadBallJoint_zpschl9humt_c1f86740d7ff607a1f03f8a40d7c72a8c3b8c134.jpg

    New_zpsgwbpdw4q_380ae43c73aa0c624abb9874b77bac8e12d632d4.jpg
    New2_zpssflxzqei_fe9a4872a350765fa83bf761c5a87965b8f144e5.jpg
     
    birry, PFD FIRE, ChadsPride and 2 others like this.
  6. Oct 28, 2015 at 11:24 AM
    #6
    ItalynStylion

    ItalynStylion [OP] Sounds Gooooood

    Joined:
    Jun 15, 2009
    Member:
    #18467
    Messages:
    5,926
    Gender:
    Male
    First Name:
    Steven
    DFW, Tx.
    Vehicle:
    09 Double Cab TRD Sport 4x4
    ^LOL....if I had an extra two grand to spend on a long travel kit I'd have pulled the trigger. But at $115 the replacement control arms were perfect. :D
     
  7. Oct 28, 2015 at 11:25 AM
    #7
    wheelerkr2

    wheelerkr2 Well-Known Member

    Joined:
    Aug 4, 2012
    Member:
    #84100
    Messages:
    530
    Gender:
    Male
    First Name:
    Kevin
    Richmond, VA
    Vehicle:
    08 TRD Rugged Trail
    replacing just the ball joint is an easy job with a ball joint press
     
    ChadsPride likes this.
  8. Oct 28, 2015 at 11:35 AM
    #8
    ItalynStylion

    ItalynStylion [OP] Sounds Gooooood

    Joined:
    Jun 15, 2009
    Member:
    #18467
    Messages:
    5,926
    Gender:
    Male
    First Name:
    Steven
    DFW, Tx.
    Vehicle:
    09 Double Cab TRD Sport 4x4
    Something I don't have. Also, after 109k miles a new control arm was cheap enough to do considering it also included the bushings which age over time.
     
    pwmullen3, BigHoss96, staco05 and 3 others like this.
  9. Oct 28, 2015 at 11:37 AM
    #9
    wheelerkr2

    wheelerkr2 Well-Known Member

    Joined:
    Aug 4, 2012
    Member:
    #84100
    Messages:
    530
    Gender:
    Male
    First Name:
    Kevin
    Richmond, VA
    Vehicle:
    08 TRD Rugged Trail
    By no means saying not to replace the whole thing, for people on a tighter budget i believe you can rent a press from auto parts stores. Luckily I have a buddy with one.
     
  10. Oct 28, 2015 at 11:42 AM
    #10
    Large

    Large Red

    Joined:
    Sep 10, 2011
    Member:
    #63268
    Messages:
    22,455
    Gender:
    Male
    lol ... I literally let out a few laughs. By no means is it an easy job with a ball joint press. Even if you find an auto parts store with the unicorn of all ball join presses that has the perfect cups to extract and install new ball joints, it's still a pain in the ass and sometimes will require a torch to do so.
     
    birry, M192, ChadsPride and 1 other person like this.
  11. Oct 28, 2015 at 12:02 PM
    #11
    wheelerkr2

    wheelerkr2 Well-Known Member

    Joined:
    Aug 4, 2012
    Member:
    #84100
    Messages:
    530
    Gender:
    Male
    First Name:
    Kevin
    Richmond, VA
    Vehicle:
    08 TRD Rugged Trail
    I disagree, used no torches or anything of the sort, took about an hour. Might be because the press was made by Snap-On and my buddy that helped is a mechanic. Still, take it all apart, use an impact and the press to get the old one out, impact and press to get the new one in.
     
    ChadsPride likes this.
  12. Oct 28, 2015 at 12:26 PM
    #12
    Large

    Large Red

    Joined:
    Sep 10, 2011
    Member:
    #63268
    Messages:
    22,455
    Gender:
    Male
    I am disagreeing with your disagreeance
     
  13. Oct 28, 2015 at 12:29 PM
    #13
    ItalynStylion

    ItalynStylion [OP] Sounds Gooooood

    Joined:
    Jun 15, 2009
    Member:
    #18467
    Messages:
    5,926
    Gender:
    Male
    First Name:
    Steven
    DFW, Tx.
    Vehicle:
    09 Double Cab TRD Sport 4x4
    [​IMG]
     
  14. Oct 28, 2015 at 12:42 PM
    #14
    jztacoma

    jztacoma Trust me I’m an Engineer

    Joined:
    Sep 13, 2013
    Member:
    #112426
    Messages:
    2,336
    Gender:
    Male
    First Name:
    John
    Upstate NY
    Vehicle:
    2021 Tacoma TRD Offroad
    Semi Stockish
    i got lucky and had both of mine replaced under warranty before i ran out at 100k. If you haven't installed them yet apply a good helping of Never-Seize or Anti Seize to the cam bolts and bushings. This will help with alignments down the road. mine were all seized up and couldnt get an alignment done, so dealer was able to hook me up on a warranty claim for both. I just paid for new hardware since that wasn't included
     
    ChadsPride likes this.
  15. Oct 28, 2015 at 12:46 PM
    #15
    ItalynStylion

    ItalynStylion [OP] Sounds Gooooood

    Joined:
    Jun 15, 2009
    Member:
    #18467
    Messages:
    5,926
    Gender:
    Male
    First Name:
    Steven
    DFW, Tx.
    Vehicle:
    09 Double Cab TRD Sport 4x4
    That's actually pretty good advice. I noticed mine (particularly the front one) was really tight in there. Took me a while to get it out. Had to use some PB Blaster to get it loose. I ended up sanding it a bit smoother with some sand paper afterward. Looked like a little rust had touched it. A little grease on there after helped a bit.
     
    ChadsPride and Crom like this.
  16. Jan 26, 2016 at 8:34 PM
    #16
    CoastalComa

    CoastalComa Well-Known Member

    Joined:
    Aug 23, 2013
    Member:
    #111030
    Messages:
    102
    Gender:
    Male
    Mendocino
    Vehicle:
    '08 6spd sr5 Sport
    An impact is a good way to Snap-Off your Snap-On press.

    Regardless, I'm about to do the same thing on both sides. Upper and lower bushings and ball joints are all rotted and/or cracked, the shocks barely dampen my sagging springs. Basically, a complete suspension system. I'm Shopping around for uppers and lowers. I'm looking for a little more performance than stock, but the only lowers I can find are camburg or TC. Way over budget for the severity of my situation at this point.
    How have they held up so far?
     
    DaveInDenver likes this.
  17. Jan 26, 2016 at 11:47 PM
    #17
    gregb287

    gregb287 Well-Known Member

    Joined:
    Mar 28, 2015
    Member:
    #151998
    Messages:
    223
    Gender:
    Male
    First Name:
    Greg
    Honolulu, HI
    Vehicle:
    2015 TRD OFF ROAD DCSB
    Bilstein 5100 front and rear, 1.5 deaver aal, trd skid plate, 17x9 xd misfits, 265/70/r17 general at2, lund nerf bars, westin tail light covers, amp bed extender, interior led swap, k&n airfilter, 20% window tint, LR uca's , spidertrax spacers
  18. Jan 27, 2016 at 12:26 PM
    #18
    wheelerkr2

    wheelerkr2 Well-Known Member

    Joined:
    Aug 4, 2012
    Member:
    #84100
    Messages:
    530
    Gender:
    Male
    First Name:
    Kevin
    Richmond, VA
    Vehicle:
    08 TRD Rugged Trail
    So? It's Snap-On, if it breaks they will replace it. :notsure:
     
    ChadsPride likes this.
  19. Jan 27, 2016 at 1:41 PM
    #19
    ItalynStylion

    ItalynStylion [OP] Sounds Gooooood

    Joined:
    Jun 15, 2009
    Member:
    #18467
    Messages:
    5,926
    Gender:
    Male
    First Name:
    Steven
    DFW, Tx.
    Vehicle:
    09 Double Cab TRD Sport 4x4
    Is this your first time using a press? With that much force being applied, things don't just fail without incident. They fail catastrophically.
     
    ChadsPride likes this.
  20. Jan 27, 2016 at 4:00 PM
    #20
    Dajeepman

    Dajeepman Well-Known Member

    Joined:
    Nov 21, 2015
    Member:
    #170329
    Messages:
    535
    Gender:
    Male
    First Name:
    Andrew
    Pittsburg , Tx
    Vehicle:
    2006 Gold Tacoma base 4x4
    That company is smoking crack pricing that much for one control arm lol
     

Products Discussed in

To Top