Any rubbing with this 265/75/16 setup?

I just bought a set of kenda klevers 265/75/16 wanting to put on stock 16 wheel with a 3 inch front and 2 inch rear leveling kit on a crew 2011 Tacoma wanting to know if I will have any rubbing issues the tires on it now are 265/70/16

 

No.

 

Cool just setting beside the stock ones it looked like it would be up against the a-arm

 

You might rub against the a-arm but people usually get either spacers or new aftermarket a-arms.

 

just put on 265/75/16 cooper discover at3's and i dont have any lift or anything, and i have zero rubbing

 

But it will only rub when cutting the wheels sharp correct

 

none what so ever

 

I've got a 2011 DCSB, TRD Off Road. It came with 265/75/r16's, and there was no way you could make it rub.....I've since raised the front 2-1/2", the rear 1-1/2", and installed 265/75/r16 GoodYear Duratracs, which are just a tic bigger than the Yokohama Geolanders I removed. No rub whatsoever....Since that install, I added 1" Bora wheel spacers just to get a better, wider stance. STILL no rubbing. I run the stock TRD Off Road wheels. I had the truck off road this past Sunday. While doing that, I had it in flexed positions unlike anything since the lift/tires/spacers....No rub. Not even close. When fully stock, no rubs even at full lock steering. 265's clear with flying colors!

 

I am on my second set of 265/75R16, Cooper AT3, now Michelin LTX MS2 on stock steel rims and run 265/70R17 snow tires on a set of 17" TRD Sport Aluminium rims with no issues. Suspension is basically stock with the TSB 4 leaf in back and the 5100 on the front in the 1.75 position.

Howard

 

No

 

Another NO!