1994 4x4 4cyl has hard time starting when motor is warm

Whats up fellas. Love my truck. I have done alot of work to my truck this summer to get it looking and running like a new one. i'm having a problem getting it to start after the motor becomes warm. sometimes its slow to start in the morning.i've took out and cleaned the cold start injecter with mild success. After motor warms up and i cut the motor off, I ussually have to turn it over 3 different times to get it to start.It acts almost like it isn't getting gas. It has all new injectors,MAS,etc. Cant figure it out. Money is tight right now. Anyone ever have this problem or have a solution? Please help. Want my baby running right.

 

Maybe try a new Coolant Temp sensor but I could be wrong. Good luck.

 

did it do this before the new injectors? sounds like its either flooding from a leaking injector or its loosing the pressure on the fuel line when shut off.

it acts the same way with too much gas as well as not enough

 

It would be nice if you could try another ECU..... but again, I am probably waaay wrong.

 

http://web.archive.org/web/20101127014333/http://ncttora.com/fsm/1996/96_repair_searchable.pdf

 

Is there a check engine light? I know purge valve solenoid will cause this. Usually it throws a code though. Could be vapor lock. (fuel lines getting hot)