Wheel spacers

could someone show me a .75" spaced tire/wheel on a newer Tacoma? I'm looking to lift & space and want to see what it would look like.

 

.75" seems small. I have 1.25" and no lift and it seems about right. My buddy has a 3-4" lift and he's spaced 2".

 

Someone on here has 3/4" spacers.....Just can't remember who. Hopefully they'll see this and post a picture. I went with 1". (Bora) I'm at a little over 2" in lift. 1" will bring 265's on stock rims just to the edge of the fenders.

 

I am happy with my Spidertrax 1.25 spacers.

 

A little off subject but will the spacers cause premature wear on the bearings?

 

I have .75" on my rears with -12 offset. I can get a picture if you're interested. @Taco_connor

 

So here's just to try and help a little. My wheels are 0mm offset, which equates to 1.1" from the factory sport wheels. Basically this is what a 1.1" spacer would do. Not exactly what your looking for, but close.

 

Here you go! I have Spidertrax 1.25" on my stock TRD Off Road. These make the BFG's sit about an inch outside the fender. You should be able to find 4 of these, or something similar, for $150-$200 max. Before and after pic below -

 

35x12.50s, -12 offset & .75" bora spacers on the rear. Maxtrac spindles up front.

 

check out spidertrax outlet, none available right now, they come up from time to time, they have slight blemishes, but nothing major, still have warranty. If I recall, $158 for 4, shipped.

http://www.spidertrax.com/outlet/2001-Up-Tacoma-4WD-Prerun

 

.75" Bora spacers w/ 315/75/16's

 

Yes. They won't fail overnight of course but they do cause additional stress.

 

The same stress as if you had bought a wheel with the same backspacing.

 

Assuming that is true, its still not a good thing.
https://www.tacomaworld.com/threads/wheel-spacers-offset-and-wheel-bearing-wear.261763/#post-6405016

 

T

hank you for this, now I won't get any lol

 

Yeah, I wouldn't get them just for looks. Mine are needed to clear my 35's.

 

Thanks for everything guys! Looking at these photos I might just go 1.5" for the spacers with a 2" lift kit. I want it clean but noticeable.