DELETE

DELETE

 

bump

 

bump

 

see this thread for a picture of the location: https://www.tacomaworld.com/threads/what-is-this-part-behind-the-grill.346963/

If it's not there the next thing would be to see if the wires are there, they would be bundled with the horn wire and go all the way back to the fuse box under the steering wheel, pins 1 & 3 of connector 1C

 

Have you seen the threads about the Gentex mirror retrofit?

 

Dude, like I told you before, if it's not there then your going to have to install one yourself. I have an 08 Tacoma and mine didn't have the Temperature Sensor located up front. I had to buy one and install it myself and then run the wires to the connector under the dash.

The part(s) are not expensive at all and really the only small difficult part would be running the wires from the Temperature Sensors location, through the firewall hole/into the cab area-up into the lower dash section, then making the pin connections to the main connector as fellow TW member muisejt already pointed out.

Look at the very last message (in Conversation) I had sent to you, there is a link to a prior thread/posting(s) here on TW concerning the part numbers needed to order the parts from the dealer.