2016 Off Road OEM rim specs

Does anyone happen to know all the specs on the off-road OEM rim. Such as bore, off set etc.?

I just would find it easier to search rims if I knew this information which seems to be hard to find published right now. Just for back spacing and off set comparisons.

 

I got someone as well looking into this for me. I want to see if I can find all this out without having to pull a tire off and measure it myself.

 

Thanks!
It is still missing some key info I would love to know. So this says it has a positive off set of 25mm? How would that compare to a rim that has -6 offset? I think back spacing is required to figure out wheel changes / how far it sticks out.

 

Take these as an example. I know this should likely end up in the wheels / tires section but might as well ask in this thread.

• Size:
  16x8
• Offset:
  0mm
• Backspacing:
  4.49"

vs

• Size:
  16x8
• Offset:
  -6mm
• Backspacing:
  4.291"

So I would wonder if these 2 stick out from the truck basically the same distance, the 2nd one would have a slightly deeper dish on the outside. Thus leaving no concern for inner rubbing from a rim perspective.

I am thinking option 2 will stick out more because of the back spacing and -6 mm offset.

 

You need offset or backspacing, they tell you the same thing about the wheel.

The first one you listed will stick out 38mm (1.5") from where the stock wheel is.
The second one you listed will stick out 44mm (1.75") from where the stock wheel is.

Jeff

 

Do you know the weight by any chance?
I've been trying to figure out how much the 16" SR black wheels weigh too but no luck...

 

What about these wheels?
17" x 9" 6x139.70 -12 4.53 MATTE BLACK 106.25
How far will they stick out?

 

62mm (2.44")

Jeff

 

Jeff, as said before you are the man! Care to enlighten me how you did the math for this? I wasn't sure how to reference it from stock wheel info.

Any info on the hub size?

 

Backspacing=(rim width/2)+inset
Inset=positive offset

 

1) 16" x 8" brings you out 1/2"(12.5mm); 0 offset brings you out another 1"(25mm)
2) 16" x 8" brings you out 1/2"(12.5mm); -6mm offset brings you out another 1-1/4"(31mm)

 

Thanks splitbolt!

 

Did you come up with those backspaces/offsets out of thin air?
I come up with 4"(101.5mm) backspace for 0 offset and 3.75"(95.5mm) backspace for -6 offset..

This illustrates it.

 

No those are the info for Method NV's and Walker Evans 504's. The WE's are the second one on the list.

I should have put that both those rims are 16x8's. The picture you posted shows the oem being 16x7's, which is interesting.

As well, fantastic diagram! Thank you.

 

*edit Picture isn't working- look for "Santa came early" thread for Deni's picture *

This is Deni's truck on the Methods. You can see the offset with the wider rim has them sitting pretty much on the edge. My main concern is going with the Walker Evans which now I know stick you further would be to far. The question was how much further which Jeff answered.

I enjoyed the info and diagram, helped me figure out how Jeff got his numbers.

 

Been looking for that answer and can't seem to find the right one. Let me know if that size will fit stock or any mods, want to purchase a Moto Metal wheel with that same size and offset on KO2 275/70/17

 

Read the post right below Bumrish from Jeff, he gave the answer in this thread.

"62 mm"

 

Oh I wasn't sure he was referring to mine. Thanks