Advice for 6" lift

I plan on going zone stage 1 for the first year then upgrading to extended length bilsteins front a rear with eibach coils up front then plate bumper

 

O yea and a Alcan leaf pack

 

jkilpatrick, it appears to me that the mods you did to the BDS lift were, enlarge the bolt holes on the front drop bracket and shave some off the cam bolt. Is that all you had to do.

 

Did you have any issues with the front end sagging with the bumper? Assuming all you had was stock struts and strut spacers?

 

Stock suspension no sagging

 

What was the weight of that bumper?

 

http://www.n-fab.com/products/sfID1/115/sfID2/106/sfID3/107/productID/630

 

You can do that or we are pretty sure you can get 15 lower control arms and cam bolts and swap those out

 

I just got my 16 Tacoma about 2 weeks ago. Want to go with the 6 inch BDS, but don't want to wait for the 16 to come out if its gonna be a while. Going with BDS lift, 285/70/18 toyo mt, Fuel krank 517's a new grill, and a light bar. Got about $8500 to spend.

 

Your budget is spot on