Hey guys! Quick question...

First off, I want to thank all of you for your valuable input, this site has become extremely helpful in many ways. I bought a 2015 DC Pre-Runner a few months back and I'm starting to dabble in lift ideas. I am most likely going with the 5100s and 885s.

My question is: is there anyone out there that did the 5100s (front and rear with add a leaf) and 885s, that did not replace the the UCAs? At least right away that is. I do plan on eventually replacing the UCAs but was wondering if this was a bad idea to delay. I don't too much off roading, occasional fishing or camping spot.

Thanks in advance!

 

I put an OME lift with new Dakar springs and waited about 2 weeks before I ordered new UCA,s, truck didn't wander or pull to either side, but I could barely get one of my fingers between factory UCA and tire. Installed new UCA,s, got it aligned, tech said it was bad out of alignment, but you couldn't tell by driving it.

 

I have 5100s up front with 885's and stock UCA's. Alignment is in spec.