Hub to fender measurement on stock 2016

I lifted my Tacoma but I forgot to measure it before the lift.

Can anyone help me out and tell me the measurements on your stock non lifted trucks.

I have a 16' Trd sport double cab short bed 2wd. Just trying to gauge how much lift I achieved out of my kit.

Thanks in advance TW!

 

Thanks^

anyone else?

seems to me the measurement varies by trim quite a lot.

 

TRDORAC 22" rear, 21" front, stock, measured center of hub to bottom edge of fender.

 

Front Driver: 20.5"
Front Passenger: 21"
Rear Driver: 21.5"
Rear Passenger:22.5"

Level front dash with me standing out side reaching in:

Lever rear

Odometer:

 

Same here on TRD-OR DCSB 4x4.

 

Seems like 21 front and 22 rear is the most consistent

 

I know this thread is old but if it helps anyone I took a couple of measurements at the rear of my 18 SR5 DCSB 4X2

Center hub of wheel to bottom of fender flare: 22.00”

Ground to bottom of fender flare: 36.75”

Both sides were identical.