over head console switches group buy

I am starting a group buy on these over head consoles with switches I have been making.
I'm starting this now due to the talk on the other threads on here and trying to get it all in one spot. I was not ready for the response on these, but I will post more pictures of the overhead consoles and the wiring as I get them done.

Here is some pictures of the wiring. The one with the plug would be normal wiring if you only had on off for all of the switches. The two white switch backs and power lines are for the heated seats switches and yes they will fit down the pillar. I will post more on the install.

Per @ramonortiz55 yes I can do this for 4runners as well

I am using 16 gauge wire for the ones pre-wired and do not recommend over 10 amps on the switch unless it is used with a relay. I am not responsible for your ability of wiring or the over loading of a switch and wire if you do so. I am also not responsible for any shorts or failures of the system if you do the wiring incorrectly or used it other then its rated capacity. I am not responsible if you brake the console trying to remove the switch panel from the console.

There will be a $50.00 non-refundable fee for some materials and to know you are serious about purchasing one on these before you are added to the main list.

Consoles will be finished and paint to match as close as possible to stock will be used to cover the console.

When the consoles are finished and ready to ship, I will request the rest of the payment in full before they will be shipped.

The buyer pays for all shipping charges.

I will only be working on these at my free time away from school and my welding. So I wanted to let you know that it can take up to 3 weeks from when I get the console to when I am done (in most cases it will take less but would rather tell you longer just in case)

It will require you to ship me your console to be done. If you want a stock one for replacement you can look on threads here or on ebay to find them.

Consoles can be retrofitted to hold a scan gauge, round temp or air pressure gauges along with switches. Please ask about a configuration to see if it will fit.

Option one
The console will be changed to hold 6 contura switches and will be provided with the panel to hold the switches. The panel will be taken out due to how hard it is to get back out to do wiring and if it is removed too many times there is a possibility that the fiber glass will remove where the clips hit.

Option two
All the parts included in option one along with otrattw switches with rockers of your choice in the location of your choice, the console will be pre-wired for the switches and will have enough wire to get you down the A pillar and into the engine bay.

Option three
Every thing included in options one and two, along with the addition of a blue seas 6 position fuse block and a hella 4 position relay block. They will be wired for you and only needing fuses to work and wiring from your battery to the block. They will come free floating and you will need to find homes for them in your engine bay. I can supply 4 gauge wire for the the positive power and 4 or 8 gauge wire for the ground if requested but there will be an additional charge of $5.00 for the copper crimp and $2.00 per foot of wire needed, you will need to tell me the length of wire needed to be supplied.

Here is where the switches will be coming from and where you can make your selections for switches.

https://otrattw.net/home.php



prices.

Option one $250.00

Option two $400$

Option three $525$


Thank you everyone for your interest in these and I hope your as pleased with them as I am.

 

2017 console list

1. 
   
2. 
   
3. 
   
4. 
   
5. 
   
6. 
   

2016 console list

1. @Russtoy (temp gauge and 4 switches.)
2. @ramonortiz55 scan gauge
3. @ramonortiz55 looking for a console with mic
4. @sladesdaddy1022 6 switch with fuse and relay box
5. @Jystr 6 switch with fuse block and relay
6. @JdevTacblank for scan gauge.
7. @Baoser option three shipped!!
8. @TIM.TRDSparks 6 switch with loom. Option 2
9. @BohlaaH option 3
10. . @dan0mite option three

 

i got one does that count? if you didnt go big mouthing i would have had time to finish it and have more but nooooooo..... so i had to start it early so you can blab here.. now i know why @ramonortiz55 always tells you to leave a thread

 

@rjsimz @Russtoy he is willing to make them for our 4runners also.

 

@3378jakesr5 PM incoming

 

Yes I forgot to say that I just need one of your guys console to do so.

 

id put that in the OP in red bold letters lol

 

If anything I should get a kickback for referring everyone from @dakotasyota 's thread!

 

I can do a kick In the back? Does that work?

 

Okay guys. I have been working close with @3378jakesr5 for a setup on my 2001 4runner and 2015 tacoma.

I should be getting the tacoma one here soon. I will provide a detailed review and installation thread on this with lots and lots of pictures

 

also, clean it up with some proper grammar. Just CAPS and what not

 

If you ever ship them out to me.

 

crap. okay. lol

 

I think I'll be in on this! Really excited to see the pictures!! This is Awesome!!

 

@ramonortiz55, @kaptankaos, @Shmellmopwho, @northwesttaco,
@Mad T, @Timbo89, @dakotasyota

Redoing your tags since you edited the post, not sure if they get the notification

 

i did

 

Would you be able to make one of these with a solid face instead of open for a switch panel? I really like these overhead panels but I'm looking to custom install my scan gauge in one rather than switches.

 

I can leave it uncut for you or I can make it where the scan gauge sits centered and have a switch on either side too as an option.