Spidertrax 1.25" on a 265 75 16 Tire!

Hi Guys,

I'm currently running a set of 265 75 16 tires and was looking at getting a set of Spidertrax 1.25" spacers and wondering if anyone has the same size tires with some pictures?

Thanks!

 

It will look like mine just about. Your tires are 10.43 and mine are 11.22 wide.

 

Well at 1.25 wouldn't it make it 11.68? You got any side shots of your truck on how far they stick out?

 

You will be just about even with the fender or a hair less.

 

How bout a front or back shot?

 

No rear shits yet.

 

Truck looks real good. You got those amp power steps on it? And im wondering if spacers are bad if you put weight in the bed or haul anything?

 

Depends on how much weight. Spacers bolt on to the stock lug. Then the wheel bolts to that. If they are installed correctly you shouldn't have an issue. People have issues because they don't tighten them down correctly and check go back and check them after 500 miles.

 

It's not ever going to be any crazy amount.

 

Then you will be fine.

 

Hey @gsxxr got some 1.25" spidertrax off a buddy to test them out and see how I'd like them and here are some pics. Tell me whatcha think!!!!! Also @Aussiek2000!!!

With Spacers:


Without Spacer:

 

Looks good.

Just a reminder to check them after 500 miles. I used red thread lock and set them at 90 fp

 

According to spidertrax install instructions it says install them and check them after 50 miles.....

https://system.netsuite.com/core/media/media.nl?id=37654&c=407909&h=d9bfd331cf327ecdd54e&_xt=.pdf

 

Yes correct sorry one to many 000000

 

Lol its all good. And after that i guess check them every time i rotate the tires like every 3k or 5k?

 

I tightened the spacers to the same Ft-lb as the regular lugs. If the spacers don't have a recommended pressure, they should still be done to the stock rating.

 

I think they look better with a little wider stance.

 

I did both spacer and wheels at 90. It's been 1300 miles now and no issues.

 

Ya i think it does to. Also got the bigger mud flaps to protect the paint too!!!

Ya was going to torque them down to 85 what the instructions say!!! And use some Blue 243 loctite!!!!