What Have You Done To Your 3rd Gen Today?

I'm pretty sure he meant sunglasses so you can take them off at night. (Cue 80s song joke)

 

What sort of lift? What color is your truck?

 

Yeah I definitely understand that! It's all good!

 

Yes. Came installed.

 

don't switch your blade on the guy in shades, oh no.

 

I have a readylift 3/2 spacer lift and OME rear shocks that I will use temporarily. I'll add OME front coilovers once I add a front bumper - probably in the summer.

 

Thank you!

Yes, but I think those are the larger 3" letter, not the FJ Cruiser style emblem.

 

Looks Good

 

Took a couple weeks or so, they bring the leather up from the states and then when it arrives they schedule it in for install. With the holidays coming up though it may be a little longer! Definitely worth it though. I get compliments from that rides in the truck about the leather.

Yeah, kind of thought this went without saying.

 

http://m.ebay.com/itm/1X-White-48SM...Interior-Dome-Lights-/271723422845?nav=SEARCH

Will these work for the interior?

 

Bed dimensions are nearly identical, only deeper and a 1/2" wider if I'm remembering correctly. It will fit just fine.

 

I can't seem to figure where to install the hooks near the tailgate... from the video I've seen it looks like there should be two bolts that I can remove and replace with a little tie down, but damn if I can figure it out.

 

I was going to hardwire my Mobius camera to the fuse panel but decided against it. Instead I ran a 15' up angled mini usb cable.

Started at the Mobius/GoPro Mount and ran the cable along the headliner and down the pillar.



I then removed the pillar covering and zip tied the usb cable to the airbag cable already running in the pillar (it does not interfere with the airbag at all, its just to keep the cable from rattling)

(dont mind my shitty rope christmas lights)

I then dropped the cable down the right side of the dash/glove box and pulled it out from under


Zip tied it to some of the cables at the foot of the passenger


I removed the 2 bolts in the bottom of the arm rest to allow me to pull up on the center console to run the cable along the side



I then had to cut a small portion of the hole that already exsist in the bottom of the arm rest/storage bin to allow the end of the USB to pop through



and with an USB adapter and the Mobius setup to turn on when power is received, this works perfectly and keeps it clean.

 

@ToyTec Lifts Boss 2.0 kit. Thanks to Tanner for the tech advice when I called.

 

I hope you have an easier time plasti-dipping than I did. I tried several times but for some reason the little crevices never worked out and it pulled off. I think I'm just gonna order me a black set

 

Technically this was done 2 days ago... But I realized I didn't post photos here where most guys are looking for stuff to do to thier trucks. Katzkin leather

 

http://www.customcargrills.com/proddetail.asp?prod=Toyota_OEM_Emblem

 

The lift looks good but is your truck all dented and scraped up?

 

No. Just dirty.

 

looking really good!.. How long did the install take? Did they encounter any issues during the install?