AZ BS Thread 2.0

I tightened the fitting and it doesn't leak, so might be a false alarm.

 

My guess is the "OhKarma" license plate is in reference to a divorce he came out on top in. Pretty sweet jeep.

 

Today was a 'blast'.
Went through quite-a-few-hundred rounds. Got everything cleaned. And picked up another lower to build tomorrow after gifts.


Decided to pop off the storage covers under the seat for extra height and easier access. Seems to work perfect. Just need to flip the rear drivers side up for access. Big improvement from having the covers on.

 

Anyone have experience on Extant Solid Fold tonneau covers?

 

No, but if your in the market, check out Peragon Covers. I was thinking about it on the F150 and maybe on whatever I get. Folds down instead of up and easily removable if the extra 6" is needed.

 

Just Googled them. The look very nice!

 

This is why it's helpful to know how to do your own alignments.
DSC_0325 by Connor Rhoades, on Flickr
DSC_0331 by Connor Rhoades, on Flickr

 

If you come to San Diego haha, otherwise I would!

 

^^^hahaha

 

Merry Christmas eve you bastards. May the fat ass bring you all the truck parts/booze/guns that you desire. Remember, its not Christmas if your not drunk.

 

Merry xmas guys

 

Merry Christmas Bitches . . .


.

.

.

.

.

.

 

Mexican Santa!

 

merry christmas ya'll!!! have a great and safe holiday!

as always keep our forward deployed in your thoughts. i know first hand as many others do in this thread... sucks being away and stuck in a shit hole this time of year. cheers dudes!!

 

I think I just came enough to lube my ball joints for 5 years worth of mall crawling

 

I actually missed being deployed during the holidays. Sounds wierd and screwed up, but it was easier to find out who really cared or not. None the less, my brother and sisters forward from me are in my thoughts and prayers.

 

nah dude. i know what you mean. there for sure is a more simplistic side to being deployed. still, there are far more many service members that would prefer to be back home as opposed to down range to see their kids and loved ones on Christmas day as opposed to being down range and i don't blame them one bit.

 

Josh, I dunno about Saturday but can atleast give advice to get your vehicle aligned using a tape measure and bubble level. While not perfect, certainly close enough to get done professionally.

Mine was pretty close and only needed to adjust caster when put on alignment setup at work.

 

Assuming stock front end, and this is quick and dirty.

Caster is ignored, lower cams are kept even.

Adjust camber using a bubble level on the wheel. If level is to big, tire will work if it has to.

For toe, you can either literally measure from tire to tire, you want 1/8"ish toe in.

Or, what works better, is get 2 long straight edges, roughly 2 feet longer then the tire is tall. Bungee one to each wheel keeping them parallel to the earth and centered on the wheel. Do your best to have tires so you don't hit any weird ribs, or raised lettering. This will exaggerate any weird toe. Measure from bar to bar using a tape and at a foot you maybe want 1/16 toe in.

This rough but will get you close enough to get you rolling. With patience you can get toe dialed in titties. Wheel straight, camber perfect, and have a nice drive to alignment shop.

I don't know if I can do outside alignments, 05tacorunner would know more.

 

Totally agree.