DIY - Build and install a Bussmann RTMR Fuse/Relay Block

My post (#84) covers cost as well...not counting minimums or tools. $186 total for just the amount of parts I needed including cost per foot of wire. I have enough left over to make some more

 

How much was the shipping from Waytek? I've added everything to my cart but it won't give me a shipping estimate.

 

Props to the OP. Amazingly detailed write up.

 

They give you the price based on actual shipping cost. It was $25 for the big order.

 

I don't like the fact that they do that. I like shopping around and knowing what I'm in for up front. They're shipping options are poorly stated too.. Order one resistor and they ship it UPS for $12...they do enough business and shipping they should offer free shipping, like a lot of companies, even if it's over x amount.

 

The OP is a badass! Amazing write up!

 

I agree. Especially when I gave them my credit card info. It's like a casino.

 

Having one built for $120

 

As much as I like Waytek for their prices, I'm not a big fan of their website or their lack of shipping estimate. That's why I tend to place a big order and then the shipping is reasonable.

 

Thanks guys! I hope the info will help you.

 

I don't wire much really. I'm fortunate enough to have an electrical engineer local to me who's willing to help.







@PSU Taco85 Ant is a fucking wizard.

 

Here's mine I'm going to be installing eventually, bit of work to do, winch however may need to be separated from the circuit



Complete with

10 Relay Switches
- Switch for ARB Air Locker Manifold Solenoid 1
- Switch for ARB Air Locker Manifold Solenoid 2
- Switch for x2 Rear lights
- Switch for x12 Rock/Wheel Well Lights
- Switch for x2 Wind-shield Mounted Ditch Lights
- Switch for Roof Mounted Light Bar
- Switch for Bumper Mounted Light Bar
- Space for an additional 3 Switches (Below Climate Controls)

2 Direct Switches
- Switch for

$611 ARB CKMTA12 '12V' On-Board Twin High Performance Air Compressor, Ideal for Air Lockers Locking Differentials, Tire Inflator, Air Horn, Air Tools and Pneumatic Tools.

ARB CKMTA12 Compressor
- Retains Factory Fog Light Harness wired to after-market Fog Lights (Optional Factory Switch)(Switch Location Moved)

3 Momentary Switches
- Ditch Lights Momentary Dimmer
- Roof Light Bar Momentary Strobe/Dimmer
- Bumper Light Bar Momentary Strobe/Dimmer


- Retains all other Factory Switches (Traction Control, Bed Plug(Switch Location Moved), RCSA)
- All Illuminable switches wired to Ignition
- All Illuminable switches wired to Dimmer Dial
- Dual Batteries
- Dual Battery Automatic Charging Relay & Isolation
- Manual Control Switch of Battery Linkage
- Auxiliary & Starter Battery Voltage Indication
- Winch Wired

 

Crimping and chill

 

Not done but thanks to this thread it has been a breeze.

 

sub'd! I need to upgrade my Yotomac box with the quick disconnects and use the mini bussman bars on the side. Just gotta order the parts..... and a few tools. And get a new mount seeing my original doesn't have enough room for the side bars

 

Looks great! The only missing from your picture is a good beer to go along with the assembly.

 

Killer!

 

Hell yeah! Having a personal EE is bonus.

 

Nice. I wish your pic was a bit bigger so that I can see the details. My eyesight ain't the best the older I get.