Snow Chains

Can anyone recommend a good brand? Something that works well but doesn't take a masters in engineering to install. These are the times when I wish I would've just bought the 4WD. smh...

 

These are the best. The cam system allows for the easiest way to get them on solidly.
http://www.pewagchain.com/Products/Snow-chains/4x4-und-SUV/pewag-square-link.aspx

 

I don't know about the best brand, but I researched this a few years ago and concluded the square links were a good choice on Tacoma's or other vehicles with close fits. I bought 2 sets of the 5.5mm versions of these. I've been pleased.
http://www.tirechain.com/square_alloy_cross_chain.htm

 

Carry a couple of pieces of 2 x 6 to use while fitting them. You lay out the chains aligned with the wheel set to be fitted - and put the two pieces of wood in line, within a chosen chain segment in the middle on each side. Drive straight onto the blocks - it will lift the wheel and leave the chains in place - loose to be wrapped and fitted. I sprayed mine dayglo orange to keep them from warping - and remind me to pick them up...... and throw them in the chain storage box. My buddy actually had some roofing nails in his - with the points barely protruding on the downside so they would bite and stay put while located on snow pack or ice.


This gadget is sold as a "Sno-Chain-Ramp" - but the two pieces of wood (one each side) will eliminate most of the fit-up hassle. You can see the principle here anyway.

You guys are reminding me that I need to get a new set that fits the TACO - they really work well in mud!

 

oh another poor story of wish i bought a 4x4...... lol

either way i carry some security chain company vbar cam style chains, they are easy to put on and will work amazing if i ever need them (4x4 ftw)

 

Or you could just drape the chain over the tire and drive forward a foot. Then hook everything up. With the cam chains it's pretty easy to get them tight too. Been using chains for a while and never needed a fancy ramp or boards to get them on. Can do it under ten minutes too.

 

I have always used the X-Bar type chains for maximum traction. I figure if I'm in a situation that I need chains I dont want to be chancing it on just any chains. I usually get them at Tractor Supply. Usually like $85 for a set. They also have replacement parts there so you can fix them if they get broken.

 

RUD