Auxiliary lights

Hey every body need some help I have a light bar and pod lights on my 06 Tacoma and have a open port/ switch down by were I can adjust my mirrors. I popped it out and bought a dog light switch acceptable to OE from autozone and it did not fit in the port. Which one will fit there or advice please help!?

 

https://www.otrattw.net

 

http://www.aironboard.com/online/toyota-replacement/tacoma-2005-2011.html

 

Too big or too small? I've had to cut the little notches out of the inside of the opening for both switches I've installed.

 

these are four pictures to help with what I am dealing with

 

Abarber11 so far they are all
Too big

 

The aironboard switches fit and look oem

 

Will it fit in the other openings I have no problem?? Refer to above pictures? Because I have fog lights on my Tacoma I am looking to get a rocker switch that will fit in other area

 

They are designed to fit in those openings , yes

Check the link I posted

They aren't rockers though they push in to activate like the OEM switches

 

It's fine that they are not rockers so are they universal? Will One fit in any slot? Sorry man just making sure I have tried four already

 

If you get the correct ones for your model year they should just push in , I don't believe the little tab differences in the mounting holes that correlate to the factory switches that go in them factor in with the AOB switches but if you did have an issue you can just use a file to remove the bump on the switch

" push switch from AOB is a single throw ON - OFF switch designed to operate your 12 volt accessories. it has a face surface size of 1.54" x 0.83" (39 mm x 21 mm) and uses the original mounting hole of the vehicle. "

"12 Volt 3amp ON-OFF Toyota OEM Replacement Push Switch with LED amber lights FOR Tacoma, Tundra, Highlander, FJ cruiser and 4 Runner "

http://www.aironboard.com/online/pu...yota-oem-replacement-bat-light-led-amber.html

 

http://www.rallylights.com/hl96517-toyota-switch-illuminated-rocker.html I usecd one of these from the stealership in those slots for my truck but you have to cut/file some plastic out of the hole for it fit, these are oem Toyota switches

 

These are the ones I got as well. But you do have to trim the hole.

 

Awesome thanks guys

 

I am going to try one from this site

 

OZ-T what are the connections on the back look like? Do they come with wiring and connectors?