1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Fan for ac and heat not working

Discussion in 'New Members' started by tylert1515, Jan 28, 2016.

  1. Jan 28, 2016 at 3:32 PM
    #1
    tylert1515

    tylert1515 [OP] New Member

    Joined:
    Jan 28, 2016
    Member:
    #176341
    Messages:
    1
    Gender:
    Male
    First Name:
    tyler
    Vehicle:
    tocoma 2011 pre runner
    Ok so this is driving me nuts.
    Fan is not working on hot or cold.
    What I have done.

    Checked cabin filter
    replaced resistor
    the relay is working can hear the click
    took fan out dissembled and cleaned
    went to auto zone and got new fan still did not work
    took out hvac switch and made a jumper to bypass switch I hear the click at the relay but no fan action.
    as well when i turn the knob i hear the click at the relay
    i checked the continuity from the wires going to the fan from the switch all good
    i checked all my fuses that i could find all good
    the only thing that i have not tried to replace is the switch
    I am not getting voltage at the fan
    I did put 12v DC to the fan to see if it would work and it did not but like i said above i tried a new fan.

    any suggestions??????
     

Products Discussed in

To Top