2012+ aftermarket headlights

It doesn't look lime you cheaped out on other mods, why do it with safety equipment? I'd get the Pro lights.

 

I'm interested how much?

 

Anyone have opinions on these aftermarket ones?

http://www.ebay.com/itm/For-12-15-T...ash=item5428d6fdcf:g:LBgAAOSwZG9Wi~y5&vxp=mtr

They are DOT approved. Might pick up a set for under 200 bucks

 

They look good! Blacking out the chrome bezel really improves the look

 

Yeah..they look awesome, just wanted to see if anyones tried them and if the beams are good. I like the sharp cut off lines of the oems

 

Those are the same as OEMs, they are just painted a bit
those are still just halogens, so the light output and everything else will the same as your stock headlights
unless you get different bulbs

 

Thanks! might try it out and do the higher power mod that crashnburn did. Projectors are def better, but Just dont like any of them out there. The Anzo ones with the U shaped led DRL is ugly. there's a seller on ebay with best offer and accepts at 199

 

Everyone likes different things, and if you like something then i say go for it!
Besides, if down the road you see something you like more, you can always upgrade.
I have seen the lights with the U shaped running light, and honestly i would avoid headlights like that. They are usually of poor quality because they use cheap parts, so the the halos are usually dim and off white.
Raxiom makes headlights like that for the mustangs, and they always just look bad

 

Yup just got them and installed them. Was a pain in the ass to get to the side bolt way inside the bumper. Had to tech up from the bottom and do it by feel. Taking the housing out isn't fun either. It's like a jigsaw puZzle and the frame is so sharp it made some scratches in the housing. All in all looks awesome and it's aimed correctly.

 

So what's the final verdict? ? My reading comprehension is below average lol. Im looking to upgrade my 15 headlights. Those anzo look nice but I also read a long post on here about burning wire harnesses with hids, leds, and projectors. Im a low voltage installer but when it comes to vehicles I'm clueless.

 

If you use good quality HID components, they wont melt

 

Got it, I might move forward with anzo unless anyone knows about anything better

 

Try the retrofit source, thats where i get all my HID compnents for the builds I do. Theyre products are really good and come with excellent warranties. Ive always been very happy with them

 

I would suggest reading this thread first: The Ultimate headlight upgrade

 

I'll check it out thanks

 

That post is exactly what I was talking about when I read about harness' burning up and HIDs or projectors burning out the plastic