eBay uniball UCA's

Any one have any experience with these almost look like total chaos uca's but a lot cheaper
Not sure if I'm sold yet


http://www.ebay.com/itm/Blue-Upper-...-2004-2WD-4WD-/272106249085?fits=Model:Tacoma

 

Tempting but seems scetchy...they don't even have a brand name?

 

Yea I know I haven't found anyone running them so idk very very tempted to at least get a set and mout them. Take em on some light trails and check there quality if it sucks I could just take themoff and ship em back but I just don't know

 

Here is a very extensive thread about the eBay arms being used on 4th gen 4runners.

 

Awesome thank you still can't find a first gen running them so I guess I can be the test subject...........mayb still on the fence

 

Check the 3rd gen 4Runner threads posts in that thread. Same UCA's as 1st gen tacos. Also this thread has an in depth write up.

 

The bushings and uniballs are junk and wear out within a month or two. Some people have replaced the hardware with higher quality stuff like the allpro hardware kit.

 

Yea that's what the wright ups were saying still after putting all pro parts in bushings, unibal, and bolts it's still like 200-250 cheaper than TC or Camburg

 

I've been running the eBay UCA arms on my 07 Tacoma for a while with no issues. I have them with 3" toytecs and 5100's set at .85. I did have to mill the inner bushings a little so they wouldn't balloon out when tightened but they didn't pack the uniball with grease like I've seen on other posts. These are the ones sold by freedom suspension.

 

Just get these & be done with it!

 

Yea still haven't pulled the trigger on them I think I'll save for the camburgs