Oahu Members Thread

Bro THANK You!!!! You killed it....and I will definitely bring that sticker by when I'm not hung over.....if you didn't know Jason was da'man......now ya know.....Hacklerchopshop!!!!!

 

Aww man. I'm back from Kapolei already.

 

hACKmans Customs

 

I still don't know why people on this site still measure fender gaps or from body points. I just measure frame to ground. But those get tweaked too..

 

and then I scroll some more and read this...

 

Yes, for leveling, measure frame to ground. For figuring out lift height when installing new lift, or adjusting ride height, frame to center of the hub.

 

Thanks to everyone that helped and showed up to cheer us on.

 

Where are the after photos?

 

I'll have to take some tomorrow. Looks like I'll have to order a new leaf pack. The allpros give more than I was expecting.

 

And you want to take height away?

 

Not really, I'm looking for a stiffer leaf pack. I keep that bed rack on all the time, plus I put the tent on for camping. The allpros don't seem to like that load on them.

 

dakars? how much lift you getting from them?

 

Lmk if you selling. My stock leaf pack is sagging real bad

 

Do u have the standards or expos?

 

Those are allpro standard

 

I was thinking about getting those but i decided to save up for some custom alcons

 

Jimbo...you can check my thread as I have some pics showing the threads on the 700's (page 44, post 874). As far as how much thread is showing, don't worry about that. You just want to set it level with the rears or a tad lower. I had over 2 inches with the 650's showing and now under that...just over an inch or so. I have a slight rake <1 inch from front to rear. Can't notice it. I think you'll appreciate the heavier springs with the extra weight you have on the truck from the armor.

 

That is what I'm thinking. Maybe with the add a leaf. But I won't be able to do anything till I get back from Vietnam.

 

Only got one good enuf pananu

 

changed drivers side lower arm, swapped out the springs and sanded/ clearcoated the icons.
Spent a good 2 hours on the sawzall, those seized sleeves are no joke.

yup they handle weight good