2016 factory tonneau cover - Long Beach

Factory cover, truck was bought 4 weeks ago. no use of it. Short Bed.

$350 perfect shape, been in garage since new.

 

I'm local and interested. Would you also swap out the bed rails?

 

do we just swap rails over? whats the difference.

 

Yeah, your bed rails are cut for the cover to attach. Mine aren't so rather than having to cut mine I'd swap yours for mine and you'd have a clean set with no cuts on it. I'm guessing yours looks like the pic below?

 

yup mine look exactly like that.

 

So we would just swap rails to make it better for both. Many guys have done it on here. Shouldn't take more than a couple of mins. and you truck will come out looking like the pic below.

 

works for me. cover is just taking up space in a small garage.

 

I hear ya. I can probably head over Saturday morning if that works for you.

 

Add me next in line if marcohh doesn't take it.

 

Hi guys.
Can anyone please tell me how I can take the side rails off. I want to swap those side rails but have no idea how can I do that.
Thanks in advance.

 

The answer that I got from another TW member was to start at the front/cab and work your way back pulling up on the rails. They have tabs securing it to the cab that are apparently pretty sturdy.

 

marcohh. Were you able to swap the rails?

 

Is that how it's done ?

 

I'll post up a reply once I get it done, should be this week and i'll take some pics if possible to help out.

 

Thanks
I'm buying one on Saturday.
That's why I'm trying to figure it out.
Good luck and thanks again.

 

Went by dealer, remove the inner fender liners on the back of the truck. At that point you can reach the clips and push them out without damage.

 

you can pull them out without damage pretty easy, just go slow. then the covers for the cover mounts pop off, two T-30 torx on each mount. take the 3 off each side, tro at the rear, the rubber grommet between bed back wall and sides pulls out. and done.

and it's sold/traded.