1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Idaho BS thread in the PNW

Discussion in 'North West' started by Jensonbt, Aug 28, 2011.

  1. Feb 5, 2016 at 1:32 PM
    rctoy

    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,956
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    don't worry i have a strap
     
  2. Feb 7, 2016 at 3:48 PM
    Smar969905

    Smar969905 ToyotaLover

    Joined:
    Feb 28, 2012
    Member:
    #73827
    Messages:
    4,790
    Gender:
    Male
    First Name:
    Zach
    Deer Park, WA
    Vehicle:
    96 Dodge 12valve cummins- mine, 16 T4R - wife's, 11 Taco - totalled
    Harbor Freight has a special that with coupon, you can get the Badland 12k winch for $300. I have been pushing on my wife to "allow" the funding to go that way.

    We can be friends even more because I have a newer version of your Sluggo, but not as well built, and when it comes to alcohol, I won't fight you for the liquor. I am a beer guy through and through.

    Maybe we need something bigger, like a semi with 2 trailers, 3 spots on each trailer.

    Those look pretty bad, especially against those wheels. You should just take them off, and sell them to me for cheap to put on my 11 ACLB that is also MGM in color.
     
  3. Feb 7, 2016 at 7:36 PM
    AFmedic24

    AFmedic24 Well-Known Member

    Joined:
    Sep 2, 2015
    Member:
    #163222
    Messages:
    131
    Gender:
    Male
    Vehicle:
    2016 MGM TRD-OR AC
    LED interior and bed lights, softopper canopy, custom grille, Flowmaster Super 44 muffler, BAMF sliders, CBI Offroad T3 full guard front bumper, Rigid 20" single row LED light bar

    Haha, funny guy! The wheels and tires are actually going to be the next big mod. I did see that winch as well... Just have to make my way up to Boise...
     
  4. Feb 8, 2016 at 7:19 PM
    Just Dandee

    Just Dandee Well-Known Member

    Joined:
    Mar 5, 2015
    Member:
    #150227
    Messages:
    607
    Gender:
    Male
    First Name:
    Dan
    Southwest Idaho
    Vehicle:
    2015 TRD OR
    Supercharged-2.5 lift-255/85/16
     
  5. Feb 9, 2016 at 12:31 AM
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,509
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    Sounds like a plan. Lets go!
    new...sluggo...? what is this madness

    and i dont like to be picky...ill drink anything in front of me lol
     
  6. Feb 9, 2016 at 12:46 AM
    Speedytech7

    Speedytech7 Toyota Cult Ombudsman

    Joined:
    Feb 20, 2014
    Member:
    #123587
    Messages:
    52,631
    Gender:
    Male
    First Name:
    ゼイン
    5520 E Sprague Ave, Spokane Valley, WA 99212
    Vehicle:
    93 80 Series LC & 96 Turbo V6 Taco 4WD
    I've done a mod or two
    Smart man, sounds like we'd get along well
    :drunk:
     
  7. Feb 9, 2016 at 4:08 PM
    Smar969905

    Smar969905 ToyotaLover

    Joined:
    Feb 28, 2012
    Member:
    #73827
    Messages:
    4,790
    Gender:
    Male
    First Name:
    Zach
    Deer Park, WA
    Vehicle:
    96 Dodge 12valve cummins- mine, 16 T4R - wife's, 11 Taco - totalled
    Ok, maybe not a new Sluggo, but a 2nd gen with 2.7. I have plans for her to be better built, but my bank account has plans for stupid things like paying the mortgage and groceries
     
  8. Feb 9, 2016 at 11:08 PM
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,509
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    Groceries....cant avoid those. have to get veggies and salmon some how...but the mortgage, i opted out of thsoe stupid things, dont need to be tied down to 4 walls and a 1/4 acre any time soon :)

    oh itd be a jolly good rip roaring time!
     
    Speedytech7[QUOTED] likes this.
  9. Feb 10, 2016 at 6:07 AM
    rctoy

    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,956
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    I don't want to hear it i have a mortgage a tow rig, a almost fully built crawler and another project mini crawler. Now if you really wanna throw a wrench into the works have a baby.
     
  10. Feb 10, 2016 at 6:18 PM
    AFmedic24

    AFmedic24 Well-Known Member

    Joined:
    Sep 2, 2015
    Member:
    #163222
    Messages:
    131
    Gender:
    Male
    Vehicle:
    2016 MGM TRD-OR AC
    LED interior and bed lights, softopper canopy, custom grille, Flowmaster Super 44 muffler, BAMF sliders, CBI Offroad T3 full guard front bumper, Rigid 20" single row LED light bar
    I love them and yes I do bump my leg on them getting out but just something you get used to. They stick out from the side of the truck an inch or two (with the doors shut) to protect from door dings and what not. They also make for a good step to get up to reach the top of the truck, but they are only slightly lower than the cab floor. They aren't like a typical nerf bar or step bar, they are made to not hinder your truck's clearance. So, for someone that is vertically challenged, they may not help much...
     
    Just Dandee[QUOTED] likes this.
  11. Feb 10, 2016 at 11:32 PM
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,509
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    I have too many hobbies and have to spread my money over a lot of things
     
  12. Feb 11, 2016 at 6:40 AM
    rctoy

    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,956
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    well cut that shit out. when you're 30 and just buying a house and going fuck i could have done this 5 years ago you'll understand
     
  13. Feb 11, 2016 at 6:56 AM
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,509
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    I don't want to do it now tho
    I don't even know where I want to live or what job I want. Gotta figure that out first
     
  14. Feb 12, 2016 at 11:44 AM
    wilcam47

    wilcam47 Keep on keeping on!

    Joined:
    Jan 27, 2016
    Member:
    #176243
    Messages:
    50,299
    Gender:
    Male
    First Name:
    Will
    Bourbon state
    Im in the same boat...Its getting to be fishing time for me...
     
  15. Feb 12, 2016 at 8:42 PM
    Tacoma.Gal

    Tacoma.Gal Let's Go Places

    Joined:
    Sep 4, 2014
    Member:
    #137612
    Messages:
    820
    Gender:
    Female
    First Name:
    Shelby
    Boise, ID (WA Import)
    Vehicle:
    '98 Tacoma TRD PreRunner
    Alpine Stereo, Clear headlights
    Anyone know of a good quality floor mat for the first gens?
     
  16. Feb 12, 2016 at 9:42 PM
    Manwithoutaplan

    Manwithoutaplan the full Monty

    Joined:
    Jan 30, 2008
    Member:
    #4500
    Messages:
    54,593
    Gender:
    Male
    ID
    Vehicle:
    07 Tacoma Speedway Blue Trd 4x4
    -Nitro 4.56 gears - Arb Front and Rear lockers. -Rear Swing out bumper Curiosity of ( Dept .94) https://www.facebook.com/Dept94 -Tinted, -ProComp 6 inch lift with Icon Coil overs and Bilstein's 7100Resi -315/70/17 - 17x8 in Pro Comp Matte black rims 4.5 bs -East Coast Gear Supply Sliders -ALL Pro EXP LEaf pack -Camburg UCA's -CAB mount CHOP
  17. Feb 13, 2016 at 11:22 AM
    Smar969905

    Smar969905 ToyotaLover

    Joined:
    Feb 28, 2012
    Member:
    #73827
    Messages:
    4,790
    Gender:
    Male
    First Name:
    Zach
    Deer Park, WA
    Vehicle:
    96 Dodge 12valve cummins- mine, 16 T4R - wife's, 11 Taco - totalled
    Weathertech...
    Somebody was telling me Husky floor liners are per vehicle, like Weathertech, but cheaper. That is also in reference to a 2nd gen
     
  18. Feb 13, 2016 at 1:08 PM
    Idaho TRD

    Idaho TRD Well-Known Member

    Joined:
    Feb 13, 2015
    Member:
    #148583
    Messages:
    74
    Gender:
    Male
    First Name:
    Robert
    Idaho
    Vehicle:
    15 tacoma trd off road 4x4
    $32 bucks for new boot. When I first showed up he told me $300+ I was like just for the boot. Thought I was going to let those greedy bastard install it.

    image.jpg
     
  19. Feb 13, 2016 at 2:37 PM
    Just Dandee

    Just Dandee Well-Known Member

    Joined:
    Mar 5, 2015
    Member:
    #150227
    Messages:
    607
    Gender:
    Male
    First Name:
    Dan
    Southwest Idaho
    Vehicle:
    2015 TRD OR
    Supercharged-2.5 lift-255/85/16
    Replacing a boot on 2015? Tell me there is story behind the repair beyond normal driving....
     
  20. Feb 13, 2016 at 3:13 PM
    Tacoma.Gal

    Tacoma.Gal Let's Go Places

    Joined:
    Sep 4, 2014
    Member:
    #137612
    Messages:
    820
    Gender:
    Female
    First Name:
    Shelby
    Boise, ID (WA Import)
    Vehicle:
    '98 Tacoma TRD PreRunner
    Alpine Stereo, Clear headlights
    Finally got my compass decal I've been wanting.

    20160213_160239.jpg
     
    AFmedic24 and JennJenn like this.

Products Discussed in

To Top