Current wheels set ups

so do your tires stick out of the wheel wells or do they sit flush?

 

They stick out of the wheel well.

 

good to know, thanks for your help!

 

I have 31s on my 2015 5 slug the wheels are Ion Alloys 15x7 with -6mm offset, 3.75" backspacing and the tires stick out but the rims look flush.

 

Sorry for the bad quality pic, its rainin in VA. They stick out even with the aftermarket fender flares on - which stick out a couple inches from the side of the truck

 

so if I don't have fender flares and I go with 15x8, -19mm, with 235s they are going to way out there

 

Yepperz. It's going to be sticking out more noticeably

 

guess i'll go with 15x7 because I don't want to have my tires to far past the body, but with that said I do like the wider stance look. I guess worst come to worst I can buy some wheel spacers if I feel necessary

 

Definitely! What wheels were you looking at in particular??

 

American Racing AR23 Wheels
think they would look good with my rack

 

I was running 235/55/16's on my 07 Taco, Access cab, 2.4l 4cy, MBWHEELS Seven X with I think the offset might be 42mm. I would like to put 245/70/16's without any mods, does any one know if this is possible?

 

I was running 235/55/16's on my 07 Taco, Access cab, 2.4l 4cy, MBWHEELS Seven X with I think the offset might be 42mm. I would like to put 245/70/16's without any mods, does any one know if this is possible?

 

Hey guys, I was going to put up my KMC Enduro wheels up for a "feeler" to see who was interested in buying them. They are 15x7 Wheels with a -6 offset, just enough to make your tires stick out a bit. PM me if any of you guys have an interest.

https://www.tacomaworld.com/threads/feeler-kmc-enduros-15x7-5-lug.414308/

 

I just got a set of 30x9.50R15 General Grabber AT2 Tires installed.

 

Looks like a pretty good deal. Not much more than I recently paid for tires alone.

 

15x8 0 offset on 30x10.5x15

 

I think that's a little too expensive for those wheels. You can find very similar ones from American Racing for about $50 a pop

 

I would try to bring him down $100-200.00. That seems to be a bit of a premium price given it's USD $, and your retail prices are more reasonable, as compared to here.

Retail, that would be worth around $1100.00 CDN for the tires, new, and $75.00 a rim, before 13% tax would be applied.

Review on the Pathfinder S/AT tire here on the forum:

https://www.tacomaworld.com/threads/pathfinder-sport-s-a-t-first-hand-opinion.311861/

 

If they got the look and fit for the truck that you are going for - i would likely go on that price. Make sure the center bore diameter is compatible with what you need first.

The value of the OEM steel wheels is negligible, and potential buyers won't exactly be breaking your door down to get at 'em... you might get lucky, but i wouldn't bank on it.