1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Who doesn't use a torque wrench?

Discussion in '1st Gen. Tacomas (1995-2004)' started by Trapperr, Feb 15, 2016.

  1. Feb 15, 2016 at 9:16 AM
    #1
    Trapperr

    Trapperr [OP] Well-Known Member

    Joined:
    Mar 6, 2014
    Member:
    #124720
    Messages:
    1,002
    Gender:
    Male
    Reno, NV
    Vehicle:
    2002 Tacoma Double Cab 4x4 3.4l V6
    I'm piecing together last minute tools for a couple of bigger jobs on my tacoma. One is my t belt, water pump job. The other is installing my OME lift, tie rods, and ball joints. The one piece of equipment I am lacking is a torque wrench. I want one to go up to 200ft/lbs but they are pricey.

    For these 2 jobs, is a torque wrench a necessity? Of all the work I have done on my vehicles, I have never used a torque wrench. Not once.
     
  2. Feb 15, 2016 at 9:18 AM
    #2
    TN_Tacoma

    TN_Tacoma Well-Known Member

    Joined:
    Jan 1, 2016
    Member:
    #173727
    Messages:
    379
    Gender:
    Male
    First Name:
    David
    New Jersey
    Vehicle:
    07 Taco PreRunner SR5 DCSB
    K&N CAI, MBRP Cat-Back Exhaust, 265-75-16s Nitto Terra Grappler, Tuff A.T. 15s 16 inch wheels, 1.25" wheel spacers, black bumper, bumper light bar in grill, CB radio, Aftermarket speakers and 2 10 inch subs, LED odometer mod
    When doing anything with a lift, tie rods and ball joints I'd say a torque wrench is a necessity
     
  3. Feb 15, 2016 at 9:20 AM
    #3
    Flowin

    Flowin Well-Known Member

    Joined:
    Nov 22, 2013
    Member:
    #117089
    Messages:
    5,487
    Gender:
    Male
    Acworth, Georgia
    Vehicle:
    2014 DCSB TRD OFF ROAD
    OME 3" lift, 265/75/16 KO2s, 35% tint
    invest in one...it's safer for all the work you do on vehicles
     
    JimboAnz and DrFunker like this.
  4. Feb 15, 2016 at 9:20 AM
    #4
    greeneggsnspam

    greeneggsnspam ಠ_ಠ

    Joined:
    Oct 30, 2013
    Member:
    #115524
    Messages:
    42,620
    Gender:
    Male
    Houston, TX
    Vehicle:
    .gif
    Too poor to list anything interesting.
    TheSpeediTurtle likes this.
  5. Feb 15, 2016 at 9:21 AM
    #5
    KenLyns

    KenLyns 8.75" Third Member

    Joined:
    May 23, 2010
    Member:
    #37674
    Messages:
    29,365
    Gender:
    Male
    Belly of the Beast
    Vehicle:
    4x4 TRD Off-Road Full-Auto
    LED Headlights, Volant CAI, 32" Duratracs
    Lol, you've been installing wheels without torquing the lugnuts?
     
  6. Feb 15, 2016 at 9:23 AM
    #6
    la0d0g

    la0d0g Its 4 o’clock somewhere

    Joined:
    Jan 25, 2011
    Member:
    #49903
    Messages:
    19,653
    Gender:
    Male
    First Name:
    Matt
    running for the hills
    Vehicle:
    For crawling not hauling
    I use a torque wrench for everything on my truck. Yes, even the lug nuts.
     
    JimboAnz likes this.
  7. Feb 15, 2016 at 9:24 AM
    #7
    TacomaZL

    TacomaZL Well-Known Member

    Joined:
    May 4, 2015
    Member:
    #154541
    Messages:
    889
    Gender:
    Male
    Illinois
    Vehicle:
    2013 Toyota Tacoma 2.7L
    WeatherTech Floor Mats; 15" Cragar Black "D" Window Wheels; Custom Center Caps; 235/75/R15 Goodyear Radial Wranglers; "TOYOTA" Tailgate Decal; Magnetic Tool Storage (in Cabin); Stant Locking Gas Cap; Salex Glove box Organizer Debadged; BHLM; Aftermarket Fog lights; FlashWolves 1000 Lumen Reverse lights; DEPO Black LED Tail lights; Differential Extended Breather Mod; FalconZero F170HD+ Dashcam; Scosche MagicMount; Tyger Auto Tri-Fold Pickup Tonneau Cover;
    I've been torquing lug nuts without a Torque wrench for a while, just recently got a cheap one from HF....holy sh$t did I over torque those things.

    Get one, even a cheap one. It's better than nothing for basic things.
     
  8. Feb 15, 2016 at 9:24 AM
    #8
    Connormc11

    Connormc11 Jangler

    Joined:
    Nov 19, 2013
    Member:
    #116879
    Messages:
    384
    Gender:
    Male
    First Name:
    Connor
    Norfolk VA
    Vehicle:
    2010 DCSB TRD-Offroad
    "Cross-threaded or torqued to Spec... tight is tight"



    but for real a torque wrench is worth it.
     
  9. Feb 15, 2016 at 9:24 AM
    #9
    Trapperr

    Trapperr [OP] Well-Known Member

    Joined:
    Mar 6, 2014
    Member:
    #124720
    Messages:
    1,002
    Gender:
    Male
    Reno, NV
    Vehicle:
    2002 Tacoma Double Cab 4x4 3.4l V6
  10. Feb 15, 2016 at 9:26 AM
    #10
    NMW 4x4

    NMW 4x4 Wheels With Moose.

    Joined:
    Sep 22, 2012
    Member:
    #87462
    Messages:
    563
    Gender:
    Male
    First Name:
    Walt
    Nine Mile, Maine
    Vehicle:
    '15 Access Cab SR5 4x4
    OME 885's w/5100's, Wheeler's HD Progressive, Firestone Riderite's.
    You definitely want a torque wrench for lift installation. I went without one for years, and now have a strong appreciation for them. If nothing else, they provide you with a good piece of mind knowing everything is as tight as it's supposed to be.

    But, also; for the safety of you, your passengers, and everyone you share the road with, you should properly torque your bolts.

    Edit: Didn't catch your most recent post ^. Good choice! :thumbsup:
     
  11. Feb 15, 2016 at 9:26 AM
    #11
    greeneggsnspam

    greeneggsnspam ಠ_ಠ

    Joined:
    Oct 30, 2013
    Member:
    #115524
    Messages:
    42,620
    Gender:
    Male
    Houston, TX
    Vehicle:
    .gif
    Too poor to list anything interesting.
    [​IMG]
     
  12. Feb 15, 2016 at 9:30 AM
    #12
    KenLyns

    KenLyns 8.75" Third Member

    Joined:
    May 23, 2010
    Member:
    #37674
    Messages:
    29,365
    Gender:
    Male
    Belly of the Beast
    Vehicle:
    4x4 TRD Off-Road Full-Auto
    LED Headlights, Volant CAI, 32" Duratracs
    The timing belt's challenge would be to have another long-handled tool to hold the crank pulley stationary while you loosen/tighten the pulley bolt.

    With tie rod ends, the stud may start spinning while you try to loosen/tighten the nut. I used a 1/2" electric impact for this.
     
  13. Feb 15, 2016 at 9:41 AM
    #13
    magog45

    magog45 Well-Known Member

    Joined:
    Dec 1, 2009
    Member:
    #26811
    Messages:
    520
    Gender:
    Male
    Canada, just south of Santa
    Vehicle:
    98 tacoma 4x4 extended cab
    5100's all around, 2.75 inch lift, polyurethane body mounts, gibson exhaust, variation of the deckplate mod, intake resonators removed 285-75-16 goodyear AT
    I usually just crank on them til the bolt breaks then back off half a turn.
     
  14. Feb 15, 2016 at 9:47 AM
    #14
    Trapperr

    Trapperr [OP] Well-Known Member

    Joined:
    Mar 6, 2014
    Member:
    #124720
    Messages:
    1,002
    Gender:
    Male
    Reno, NV
    Vehicle:
    2002 Tacoma Double Cab 4x4 3.4l V6
    I've been installing EVERYTHING without a torque wrench
     
  15. Feb 15, 2016 at 9:50 AM
    #15
    KenLyns

    KenLyns 8.75" Third Member

    Joined:
    May 23, 2010
    Member:
    #37674
    Messages:
    29,365
    Gender:
    Male
    Belly of the Beast
    Vehicle:
    4x4 TRD Off-Road Full-Auto
    LED Headlights, Volant CAI, 32" Duratracs
    ^I tighten most frame bolts and drain plugs without a torque wrench. Lugnuts in particular need to be torqued to spec, because the wheel's motion puts a loosening torque on the lugnuts by inertia.
     
  16. Feb 15, 2016 at 9:58 AM
    #16
    Pushincaskets

    Pushincaskets Well-Known Member

    Joined:
    Feb 24, 2014
    Member:
    #123901
    Messages:
    835
    Gender:
    Male
    First Name:
    Mike
    High Point, NC
    Vehicle:
    07 PreRunner DCSB
    4" Maxtrac Spindles, Dakars and extra leaf, SOS Concepts bed rack, Lund tonneau cover, RTT,
    HUH?? So if that was the case it would only loosen one side of the truck correct. LOL
     
  17. Feb 15, 2016 at 9:59 AM
    #17
    bry838

    bry838 Well-Known Member

    Joined:
    Sep 3, 2014
    Member:
    #137527
    Messages:
    2,403
    Gender:
    Male
    oregon
    Vehicle:
    '00 tacoma 2.7 4x4 reg cab 5speed x's 2. '01 T4R 3.4 5 speed
    Whats the rating on lug nuts anyhow?
     
  18. Feb 15, 2016 at 10:23 AM
    #18
    KenLyns

    KenLyns 8.75" Third Member

    Joined:
    May 23, 2010
    Member:
    #37674
    Messages:
    29,365
    Gender:
    Male
    Belly of the Beast
    Vehicle:
    4x4 TRD Off-Road Full-Auto
    LED Headlights, Volant CAI, 32" Duratracs
    ^83 ft-lb

    Yes. In some race cars, they use LH thread lug nuts or hub nuts on one side of the car for this reason. Usually the LH thread nuts are color-coded to avoid confusion.
     
    Last edited: Feb 15, 2016
  19. Feb 15, 2016 at 12:34 PM
    #19
    Indy

    Indy Master of all I survey.

    Joined:
    Sep 15, 2013
    Member:
    #112518
    Messages:
    2,582
    Gender:
    Male
    Old vehicles, left handed threads on 1 side was the norm. I believe my willys is set that way. They had an obvious concern that the near light speed, 60mph, would undo the lugs :laugh:
     
  20. Feb 15, 2016 at 12:37 PM
    #20
    ragincajun35

    ragincajun35 Well-Known Member

    Joined:
    Jul 4, 2013
    Member:
    #107595
    Messages:
    3,001
    Gender:
    Male
    First Name:
    Spencer
    Louisiana
    Vehicle:
    2015 DCSB MG TRD Offroad
    See Builds....

Products Discussed in

To Top