Anyone into R/C?

thanks guys! I understand.. and that might have been what it was. it might have kicked in and its set too low.

the batteries are 35C.

ill see what the esc is set to stock, tonight and go from there.

 

From what I understand Traxxas ESC has a LVC setting at 3.7v so overdischarging it shouldn't be an issue as long as the LVC mode is turned on.

The batteries started to charge after awhile. Took maybe 1 hour to complete one battery.

 

if you ever over discharge one, try putting it on your charger at the lowest amp rate and see if it will take a charge. could bring it back to life.

 

believe that's what Colby did.
headin out in a few to test them out again in the dirt.

 

And Josh tested the fuck out of it......

 

I just ordered an NQD 'Tear Into' boat from Amazon for fairly cheap.

http://www.amazon.com/gp/product/B0...ue&ref_=ox_sc_act_title_2&smid=A14EIS1Z11SCZL

 

Hey guys, I have a honcho and have a quick question. Has anyone put a sound system into their car? It's too quiet when I'm driving around!

 

Nope. Not my thing

 

There was mention of it a few pages back, @Moose1988 I think brought it up or had a link to one.

 

Here it is, @BradyT88 posted it up
Anyone into R/C?

 

Y'll are so good at this. Thanks!

 

Sure did!

Welp.. First major catastrophe.. Hit a good sized boulder at the park at good enough speed to do this...

 

Broke a rear knuckle.. A steering servo arm.. And blew out a shock. Picked up RPM knuckles and a traxxas rebuild for the servo arms at my local shop.. Started tearing it down.. And realized it just pulled the threaded shock shaft out of the mount. Threaded it back on the mount, got the mount back on, got the coil on.. Then realized I was missing the top collar..




Headed back to the park with a flashlight.. And sure enough..

 

But.. now I just realized I'm stuck again...

didnt realize I needed new bearings as well when i bought the RPM knuckles..



so.. back tot he shop tomorrow for the bearings. ill do the servo now at least.

 

All fixed! Minus the knuckle. Gotta get that bearing tomorrow..

How the hell did this servo arm break like this and disappear.. Lol

 

Nice it's almost fixed. I got all the batteries charged and ready to go. I might head to the park and see if I can find another spot to play in.

 

So from what I've been finding.. 5 x 11mm bearings are what I need for the carriers. My local shop should have the Traxxas bearings.. those will work with the RPM carriers right?

 

awesome! let me know if you find anything. I should have the truck back up and running today.

 

Would I be considered an addict if I put my beadlocks together on my lunch break? 'Cause that's totally what I did.

 

no.. because I just ran to the hobby store to pick up knuckle bearings and installing them now on my lunch break. lol