The Frankenstein Build! LT/Expo/Trail rig..and BS

Black dog just noticed my 20year old factory clutch is starting to slip when trying to accelerate hard... Advice on aftermarket clutched would be much appreciated.... I've got 500 miles till I'm home lol

 

Yep that's probably him

 

Yeah my passenger side has a slight leak. Eventually I'll have to replace it. I'm mainly worried about taking the cv out. Idk about the diff side of the shaft, like how's it connects up and whether or not if have to mess with the auto disconnecting diff. parts.

 

Monte, just picked up the GM Alt. Holy shit its big... How did you wire it up, you got any pictures?

 

I posted a thread about doing a large case gm swap got 0 response... Tuned in for this

 

This is what I'm using:

 

Monte did the swap on my truck for me. I recall there being only a couple of slightly tricky spots. One was figuring out how much space was required to fill the gap for the main mount to the stock bracket. The other was adapting the 3 wire stock connect to just two wires. One thing we wanted to do was to be able to swap back to the stock alt easily as a trail fix in the event the GM alt failed a long way from home.

Here are a few pics a took of the swap:

 

What year and model vehicle did that come out of? I was looking at ho's and can't find one that 12-6

 

I think this is the one I got. Its for a '95 Cadilac Fleetwood. Check out that thread St Andrew posted earlier. I think it also says which car ro base it off of.

http://shop.advanceautoparts.com/p/...9-P?navigationPath=L1*14920|L2*14999|L3*15587

 

Depends on your wants and needs. If you want a stocking feel but a but better feel. LCE makes a great kit.

Nah just pull it out man. It works the same as the driver side. Just an E clip holding it in. Whack it with a wood hammer to get it back in.

Yea I have lots. Give me a few minutes. I just got home from being out all day working and have only eatten a pop tart...12 hours ago. #audiorecordinglife lol

 

Thanks man, much appreciated. I had to remove the lower bracket (for the tension adjustment nut) just to fit it in. I'm going to pick up a GM pig tail tomorrow.

 

Thanks for the tips everyone. Also, another random question, those adjustable bilstein 5100 shocks with the extended 3 inch coils you had earlier, you could theoretically 5.5 inch of total lift right? If u just extend the shock to 2.5 plus the 3 inch lift from coils right? I'm considering this upgrade because currently I just have a spacer lift that I would like to replace soon.

 

Not without dropping the front diff to accommodate. 3" is about the max your stock front end can handle due to the CV axel's.

 

Lol yes nice... All the ho alternator company's make big Alts for this setup... Mechman has a 370a elite for the fleet wood

 

Ah, yeah forgot about diff. drop

 

Hold up a sec. Did you change the pulley on yours? Or did you get one with a three rib pulley?

Diff drop will help get to 3"s. What you are talking about will need a drop bracket.

 

Looks like he just swapped his stock pulley to it which will work

 

Thanks for the insight I didn't realize lce sold clutches... I'm eyeballin the Marlin crawler 1200lb clutch... Then maybe I could focus on front and rear lockers if the price of oil would just go back up so my job outlook would be more stable lol

 

Pretty sure you would have like zero down travel then.

Stay under 3" of lift. And don't get a diff drop.