2015 TRD OEM rear wheel fender clearance measurement

I had the unfortunate situation of having someone run a red light and 't-bone' my new 2015 Tacoma TRD AC and am having issues with the repair shop getting the rear suspension back to OEM clearance- can anyone provide me with the stock clearance distance from the centerline of the rear tire on either side rear of the truck- the shop is good but failed in setting this up correctly (truck was hit pretty bad with lots of issues on the 'hit' side)- I just want to make sure when I pick it up tomorrow it is right and any measurement or advice on the rear suspension setup would really help me determine if it is correct. Thanks in advance!!!

hopefully soon I can get back to this:

 

You know there's more than one TRD model right? Might help if you mentioned which one you had, because I believe the clearance would be different for the off road since it has the non tsb 3 leaf pack.

 

thanks Sub_Par - I have the standard TRD not the 'TRD Pro' ... is that what you mean?

 

No there are two other TRD packages, TRD sport and TRD off road. Judging by your wheels you have the off road package, I can't help with that measurement as my sport would be different. So ask someone with an offroad to help.

 

right I need specs for a 2015 TRD Off Road rear wheel fender clearance then, thanks for the clarification

 

I want to say right around 22"? I can check after work to be sure. There was a big thread about this, you will want an average as each truck is going to be a little different. Mine may be 22 but yours may be 22.5

 

Also, these rear stock leafs are so weak having a full or empty tank probably makes a .25" difference on the drivers side at least.

 

Are you wanting from level ground to the fender flare? I have a 15 AC Off Road and can try to get it for you.

 

That's no good due to differences in tire size/inflation. He needs fender to centerline of wheel. Also AC is going to higher than DC as it is lighter. OP, is your truck a DCSB?

 

Sorry didn't see OP had an AC, I can be of no further assistance as I have a double cab. Your up @shakerhood

 

I am out on the road right now and will try and take a few measurement when I get back home.

 

I was able to snag a quick measurement but was parked on a gravel surface, from the centerline of the wheel to the fender flare was about 22 1/2".

 

it's dark here now so now rush
I picked up my rig and its seems good to go thanks to all for the responses!!!

 

Glad all is good.

 

Looking good out back little less then 22" (21 3/4" full gas tank, cold tires, bed cover and full tool box in back)

I'm looking at getting the front measurement ....

Thanks again for the assistance, really nice having all the assistance on this, thanks!