PrInSu Design Studio Roof Racks BS Thread

Correct... Zero overhang. The light bar is very close to the deflector but seems to just clear..

Thanks again Spixelz for helping with my set-up!

 

Can you update my order? I'm currently #128 on the WL. Thanks

Cabrac with textured black side rails and wind deflector with 40 inch cutout for light bar. Black anodized cross bars. Thanks

 

The details on the list aren't super important. I was trying to get a rough number early on for materials purposes but you will place your actual order through the website and can order whatever you would like then.

 

got it, thanks

 

Grooovyyyy, Baaaby.

 

OP

 

I just installed the weatherstripping on the wind deflector and it made an immense difference for me. I was getting pretty loud noise and whistle around 60+mph. All whistle is gone and now it's just slight wind noise. I recommend buying this stuff off Zachs website if anyone is having too much wind/whistle noise. Even the wife said it completely fixed it. Thanks again Zach!

 

Looks good bud. How is the wind noise without a light in there yet? I've ordered the 30" cutout but am going to hold off on the lights until I can justify the expense. I'm hoping that it doesn't sound like blowing across the top of a Coke bottle.

 

I am interested in doing a cabrac and toprac in the future, but I am currently shopping for a camper shell. I was curious as to which toppers have been used and will for a level rack from front to back between the ARE X and CX series and the LEER 100XR, 100R, and 100RCC? I am looking for the level rack for a place to mount an RTT. Thank you for all the help.

 

I have seen these racks installed on pretty much all of the above and they are pretty much all going to give you a level rack front to back. You may have to shim with a couple washers to get it zero'd in but it will be within 1/8 - 1/4" regardless.

 

mine is an ARE, it sits a good bit lower. without measuring I would say at least a 1/4", may 1/2". Not going to matter to me with a RTT as I can't span the two racks, or at least don't want to so I can still have room for flex.

 

I have the CabRac with 30" cutout on the way, I think it will be here today.
Still undecided on a light bar though, I love the Heretic Wraith but I don't know that I can justify pulling the trigger on a $570+ light bar.

Are there any other quality options that anyone is using?

 

Zach, i sent you an email regarding getting this to Calgary and never got a reply. Just following up.

 

AVEC

 

^This.

Selling my 30" soon. Nothing wrong with it, just don't need it anymore.

 

Check out The Retrofit Source. They have 10 year warranty single row. 42" is $230 with a harness. There's a coupon code for 10% off too

 

Wish they had a 30" bar! I would be worried the 27" would be too short with a 32" cut out.

 

Yea I was looking at that too, they have the 27" bar which is as close as you're gonnna get.

 

By the way @zscott the rack is at the house today, I'll post pics when I get it mounted!
Excited!

 

Tried browsing through and looked at the light bar links on the OP but no sucess- Any pictures/word on mounting a dual row light bar and how much it would stick up? Something like a cheapo Amazon one?

Xprite 30" Led Off Road Led Light Bar Flood/spot Combo Beam- 3w Led-180w

http://www.amazon.com/Xprite-Light-Flood-Combo-Led-180W-11/dp/B00LNJI1KI

It's an inch taller than a heretic it looks like.