South Carolina BS thread under new MANAGEMENT and lives in SC

Lots of mud, now more visible too. Pile of orange dust in the garage, nasty

 

Single row 20

 

Mee too

 

How did it fit? My 21" is a little on the big side...

 

Lol, your truck is nice, and you have a new ride coming any day

 

Jeff,
I'm sorry to hear of your situation, but I'm going to tell you what you really need to hear...
It was just a job. Pick yourself up, dust yourself off, and go out and find another one. In the grand scheme of life, it's not a big deal. I know it sucks, but you can get over it if you stay positive.

 

Perfect. The chinese hardware was a bit fat for the slot, ez fix with a grinder. Width wise was perfect, its like this bumper was made for me. Ive had this bar for like 3 weeks....

 

I just took a stress nap.. And feel better.. Just hard cause it was my baby just as much as his. I did all the maintenance on that place.. Was a labor of love.. On top of just a job.. But I have put out lots of feelers out today and net worked to see what I can do tomorrow.. Just pushing through.. Worst case I foreclose my house move in with my mom and deliver pizzas and take pictures of women for my scrapbook

 

Pro Comp Stage 1 kit....wheels are 16x8 with 4.5" back spacing.....have to run 1.25" wheel spacers if you use 16" wheels....on the drop bracket kits, the trucks tie rods are flipped and they will make contact with the inside wheel lip with out the spacers. Or you can run 17" or 18" wheels like FabTech & Pro Comp recommend.

 

Jeff do uber

 

Sorry, Jeff, that's just the "Dad" in me.
At present, you don't have the opportunity to stay put, so you can go up or down...It's 100% up to you as to which way you go.

 

So my buddy with the 84 truggy is thinking about trading his beater XJ and BRZ for a Gen 3. I am a bad infulance apperntly

 

Good Lord...sorry Jeff. Hang in there bud.....my last job was for 13 years.....when I left I was all bummed. Now this one is so much better & so is the pay. Things can work out for the better!

 

I'd get shot..

 

Nah, don't go getting shot.

 

Got my rear 5100s in and now just waiting on the wheeler's AAL. Had no idea that thing was getting shipped outta Oregon!!

What else am I gonna need for this install? Already got some new u bolts on the list... Thinking about getting some new strut mounts and/or coil isolators. I have no idea what things are gonna look like in there so I might as well just replace them anyways since they're not that expensive. Do I need to get the coil isolators with the strut mounts or do the strut mounts come with the coil isolator already in it? If there's anything else y'all can think of that I should probably get definitely let me know

 

Sweet!

 

Your using your factory coil springs, correct? Did you get whomever your 5100's are coming from to put the c-clip in the correct position?

 

Morning. Heading to charleston and back today. Holler if anything needs a ride.