OME 884 coils

Just a random question does toytec sell the 884x coils or the older coils?

 

All OME coils purchased new now will be the " X " type

 

X2. Been that way for at least 2 years now.

 

K thanks guys.

 

will they have an X next to the name on the tag on the coil? I think mine just say 885.

 

If they are the "x" series they have a big old X on the label.

 

damn now i really need those spacers before install, i wont be able to handle a huge saggy front end and have the back up in the air.

 

My recommendation to you is to install the longer studs on your strut (pretty cheap from Wheelers) so if you decide you need the 1/2" spacer you can put them in yourself in a couple hours. I had to pull the struts and have a shop install the studs after the fact when I decided to go with the spacer to regain my lift.

 

heres my dilemia, i bought used bilsteins so i have to pull my stock stuff and get the strut removed so i can get the cap and studs and then have it installed on my lift stuff.

I'll go back onto wheelers and see if i can order the studs and 1/4 spacers before i dive into this and then have rip it all out and start over. with a 2" AAL in the back i want the front as high as i can get it.

 

I've got the 884s with a 3/4 inch plate spacer and an AAL. Back sits 1-1 1/2 inches higher. I'm thinking of taking my AAL out because I want my truck to sit level.