Patience is key for installing Tacoma letters on glove box

Took about 15 min and some patience to install the Tacoma letter inserts on the glove box. Here is the process I used:

- clean the glove box letter area with alcohol to remove armor all or other vinyl dressing
- prepare a coffee cup full of water and a small squirt of dishwashing soap (I used Dawn)
- place towel on the floor to soak water runoff from the install
- peel the edge of the first letter from the paper in order to easily pull the letter from the paper during the install
- soak one paper towel in the dishwashing soap and flood the indented area for the first letter on the glove box
- peel the letter off the paper and "float it" within the appropriate indented letter area
- align the letter by moving the letter with a toothpick. It moves around easily if you have flooded the area
- once the letter is aligned, lightly dab the letter with a paper towel to remove the excess water
- repeat process for other letters and let the area dry well for a day before you spray anything on the dash

 

sounds like overkill LOL.
I did it in under 5min. I just peeled letter put in my hand adhesive side up and give it a spray with my soapy water and stuck it on. No issues with it not being able to move around. You dont need a ton of water for these

 

you have a source for these letters?

 

https://www.tacomaworld.com/threads/color-matched-glove-box-decals-now-available.419538/

 

Good to know in case I start forgetting what kind of truck I have.

 

Patience? Never heard of her

 

thank you very much for the link.