Anyone running the Fox 2.0s

does anyone have pics with them set at 2" running 285s?

Thanks in advance.

 

Curious as well

 

I will be installing my Fox 2.0's this spring, but not with 285's.

 

Ok so I got my shocks installed finally today after much anticipation. Will post pics this weekend. So far so good, ride is nice but a couple of questions for those running the 2.0 setup and the rest all stock parts

1. Mine are not mounted upside down in the rear so i'm happy about that. I kinda miss that protective boot on on the rears. Any one have issues with them and collecting grime and wearing down quickly esp when you guys are trailing in the mud? or just in plain ol dirt trails? Do they even have boots for the fox 2.0s?

2. My factory setting was definitely not 2 inches. I only got just about an inch of height in the front. So now i'm waiting for my spanner wrench. Only concern i noted with the ride is that when i'm coming to a complete stop the truck bobbles back and forth just slightly, but noticeable. Anyone else have that issue or know whats causing that? Not enough load on the spring? Assuming I'll need to increase the preload with my spanner to get more height and help the shaking/wobbling?

Thanks for all the help

 

I have them but on a first gen