Just finished lidt

Just finished my lift today came out great . Thanks to all the people here giving great advise and ideas

 

What are the specs on the lift?

BTW, Like the gunmetal TRD wheels with the silver.

 

Yep looks sharp, nice work.

 

Looks nice! Ditto on the wheels. They match the truck well.

 

Thanks guys.
Toytec bilstein 3 inch lift with the top spacer and add a leaf in rear
Wish I would have done leaf pack in rear tho . Has the bro lean especially with a payload in the back

 

Hoy do you like the toytec bilsteins? I am waiting for my allpro standards to come in and then adding these in the front

 

Yea I do the only complaint I have is I know have a little bit of a goast stearing when going down the high way 70+ but I can not say that is the lifts fault

 

It's the height not the specific type of lift. The same height would have same problem with another coilover type. Tell your alignment tech how it feels and what you would like out of it and maybe they can adjust for your style a little better

 

Sweet truck Trev.

 

Tire size?

 

Totally unrelated to this thread, but are you from Saipan?

 

At the height your at, it's likely you'll need new UCA's to be able to get your truck's alignment back into the green.

 

yes...very sweet truck. about to pull the trigger on a 3" lift kit from Toytec and the Bil 5100's. hoping it will give me the comfort and performance.
worried about whether I should have to replace the UCA's like Fitz235 mentioned.....don't want my new tires being eaten up.

 

looks good man, good job

 

Ya I am from Saipan bro

 

I have light racing uca went back to the tech today my stearing wheel was a little off so he fixed that up and did another allinment it is much better now Thanks for the advice

 

Running 285 70 17 very slight triming

 

looks great! i also suffer from a slight bro lean. i figure ill do an add a leaf to fix it up. i also run 285/70/17s.....for now