AZ BS Thread 2.0

Some combos. I'm not liking the light blue or gray. Red and dark Blue are good, black in a pinch. Didn't realize I had that particular black tie, I'm liking it.

 

Only thing that looks good in this pic is the snickers. I love whiskey, despise JD.

 

Id say red or black. Just my 2 cents

 

Right there with yea

 

I'm gonna try both ties out. Thanks for the suggestions. I've never been good at pairing shirts and ties. I got a buddy who does this for a living but he likes the flashy skinny almost hipster style suites.

 

I like skinny ties, but as long as the suit fits right thats my only real concern when i dress up

 

Hmm... I doubt I'll have the funds available. I'll look into it though as what I'm looking for.

 

All of you people and your drinking, I'm to jelly. I haven't been able to drink all week incase the wife went into labor, she's being induced tomorrow at 8a although I now have a set time to be sober by, it would be my luck that she went into labor tonight while intoxicated and unable to drive I would never hear the end of this. So here I sit with Coke, just Coke

 

When I came back from deployment all tone and slim, I bough an Italian slim fit night suit. Nicest suit I ever wore. Wore it 3 times and it went up in the closet.
Tried it on a couple months ago and it was way too right now.

 

Uber or lyft

 

First off congratulations. And im just saying... It'd certainly make for a good story if your girl ever did let you off

 

Hey, AZ! I'm headed from Cali to Phoenix/Glendale for a weekend of bachelor party and spring training shenanigans. Can anyone suggest a good offroad trail in the area? Maybe a quick 1-3 hr trail I can hit up while some of the heavy party dudes are sleeping in? Something in the easy/intermediate level since I'll be solo. Thanks, all.

 

bloody mary's at the hospital!!! congrats man

if she's going to PCH you guys have a good chance of meeting my old lady there. lol

 

https://www.tacomaworld.com/threads/az-trail-ratings.420477/

 

Going to be building a Bussman fuse/relay block using that newish DIY thread. The list of needed items is below. This is as much for myself, as I have edited it to my needs, as it is to answer your question haha.

https://www.tacomaworld.com/threads...n-rtmr-fuse-relay-block.399454/#post-11086088

• Bussmann RTMR fuse block
  • Bussmann 15303-2-2-4
• Terminals
  • Metri-Pack 280 Sealed Tangless Female 12-10 AWG – 12110853: Mouser
  • Metri-Pack 280 Sealed Tangless Female 18-16 AWG – 12110847: Waytek Wire
  • Metri-Pack 280 Sealed Tanged Female 12-10 AWG – 12077413: Waytek Wire
  • Weather-Pack Female 20-18 AWG – 12089188
  • Weather-Pack Male 20-18 AWG – 12089040
• Cable seals
  • Metri-Pack 280 Cable Seals Blue 12 AWG – 12015193 / 15324981: Waytek Wire
  • Metri-Pack 280 Cable Seals Green 20-18 AWG – 12015323 / 15324982: Waytek Wire
• Cavity plugs
  • Metri-Pack 280 Cavity Plugs – 12010300: Waytek Wire
• Wire
  • 18 AWG GXL - blue, green, orange, white, yellow, brown, red/black
    
  • 10 AWG GXL - red, black
  • Welding wire 4 AWG: Remy Battery
• Metri-pack Connectors
  • Metri-Pack 280 Two-Way Female Connector – 1530027: Waytek Wire
  • Metri-Pack 280 Two-Way Male Connector – 15300002: Waytek Wire
  • Metri-Pack 280 Terminal Position Assurance clip – 15300014: Waytek Wire
• Weather-pack Connectors
  • Weather-Pack Six-Way Female Connector – 12015799: Waytek Wire
  • Weather-Pack Six-Way Male Connector – 12010975: Waytek Wire
• Fuse and/or circuit breakers
  • Blue Sea ANL Fuse Holder with Insulating Cover 30- 300A, Part # 5005 Waytek Wire
  • 80A ANL Fuse Waytek Wire
• Relays
  • Song Chuan 301-1A-C-R1 Waytek Wire
• Wire Loom
  • 1/4″ expandable braided sleevingWaytek Wire
• Heat shrink
  • 3/8″ adhesive-lined heat shrink tubing, black – 3M EPS-300 3/8: Waytek Wire
  • 1/2″ adhesive-lined heat shrink tubing, black – 3M EPS-300-1/2-BLACK-48: Waytek Wire
  • 3/4″ adhesive-lined heat shrink tubing, black – 3M EPS-300- 3/4-48: Waytek Wire
  • 3/4″ heat shrink tubing, clear – DSG Canusa CPX 100 0750 CLEAR: Waytek Wire
• Mounting bracket - Will likely fab up my own, or pay @JeepAndrew to figure something out haha
  
• Busbars
  • Blue Sea Systems 5 Gang Common 100A Mini Busbars Waytek Wire or
    $15 Blue Sea Systems 2304 100 Amp Mini BusBar with 5 screws, One size, Without Cover, Black
    Amazon
• Heat shrink ring terminals
  • 12-10 AWG, #8 hole heat-shrink ring terminals: Waytek Wire or
    $8 Electriduct Heat Shrink Ring Terminals with Adhesive Liner 12-10AWG (Yellow) | Ring Size: 5/16" Screw - 10 Pieces
    Amazon
  • 12-10 AWG, 1/4″ hole heat-shrink ring terminals: Waytek Wire or
    $9 Electriduct Heat Shrink Ring Terminals with Adhesive Liner 12-10AWG (Yellow) | Ring Size: 1/4" Screw - 10 Pieces
    Amazon
  • 12-10 AWG, 5/16″ hole heat shrink ring terminals: Waytek Wire or
    $8 Electriduct Heat Shrink Ring Terminals with Adhesive Liner 12-10AWG (Yellow) | Ring Size: 5/16" Screw - 10 Pieces
    Amazon
  • 22-18 AWG, 1/4″ hole heat-shrink ring terminals: Waytek Wire or Amazon
• Copper crimp lugs
  • To connect to ANL Fuse holder: 4 AWG with 5/16″ hole
  • To connect to Bussmann RTMR: 4 AWG with 5/16″ hole
  • To connect to external busbars: 4 AWG with 1/4″ hole
    • Remy Battery
• Fuse Tap
  • ATM Add-A-Circuit, ATM Fuse Tap
• Molex Mini-Fit Jr. connectors
  • Male plug connectors (Molex part #39-01-3103) Mouser
  • Female receptacle connectors (Molex part #39-01-2100) Mouser
• Molex Mini-Fit Jr. terminals
  • Male pin terminals (Molex part #39-00-0040) Mouser
  • Female socket terminals (Molex part #39-00-0038) Mouser
• 22-18 AWG Female Quick Disconnect Red Nylon .250 X .032 Waytek Wire

Okay man, I'll let you know as I get closer to pulling the trigger on this when I have more free time.

 

Thanks, and well I was already partly drunk/hungover depends on who you ask when I got married the wife wasn't to happy about that lol. So can't keep up the trend with the first born may not end well for me.

 

I think I bought the wrong Guinness on St.P. Does it need to be the Guinness with a widget inside to work properly?

 

Going to Osborn as its where our dr. Delivers since it's a stones throw from his office lol. And I'm not a fan of tomato juice no matter what's in it hah.

 

When i get hitched you best believe i wont blow .00.... You know... If someone gives me something to blow n what not

 

Well if you invite @JohnNP to your wedding I'm sure he can help you out with that request.