look what i found on the web..

http://www.rhdjapan.com/jdm-low/TRD-Push-Start-Switch-51266

....what do u guys think? i would do it, but the tacoma is not on the list of compatible vehicles

 

I'm sure you could make it work by manipulating wires but I really don't know what I'm talking about.

 

probably why tacomas arent included

 

Where does that go in the dash? If it replaces the lock cylinder, you could always disable the lock pin. It would be pretty easy to wire in, but you're gonna be cutting up your factory dash harness.

I'm not sure something like that is worth hacking up dash for, though.

 

Is the fit list the same as the recall list for runaway cars??

 

We-tall-did

 

I don't remember seeing too many trucks being modified over there (Japan). Hell, I don't remember too many trucks that weren't used for commercial uses either.

 

Key would have to be in the ignition to the 'ON' position and the switch would be wired into the 'START' position. No other way to do this, unless you have a remote start installed with immobilizer bypass. Would be retarded either way because you still have to push the button AFTER turning the key, when could just turn the key another quarter turn to start.

Cool, but mildly retarded because the truck is not designed for it.

 

Yeah, i was stationed in Japan for 4 years and dont remember many truck at all for personal use other then military members in them.