Leveling side to side.

Just putting these pictures up in case anyone is planning on installing spacers to correct the lean.
Front is toytec 1/4", on the truck installed it gave me 1/2"
In the rear is toytec 1/2" axle shim, on the truck it game me 1/2"

I was able to use the stock hardware. There was still plenty of threads left on the front and the rear bolts.

My truck is an sr5 double cab, longbed, 4x4. I have bilsteings 5100 set at .85 in front. Rear is stock.

*Edit: I did not install these myself. Had shop do it.