Oil catch can install

Ok, I've searched and came up with a couple different ways to install catch cans with supercharger. I need to verify the plumbing as most posts don't have enough detail or have different people arguing which way is better? Where are you guys running the line from and back for the canister(I see a lot of them coming from the passenger side valve cover at the pcv valve, but I'm confused to where the return is, as it looks some are returning back to the valve cover, then some appear to go to the bottom of the SC on a vacuum port toward the drivers side)? Are people using the in-line fuel filters because they have catch can without filter media, or as additional filter before returning to crankcase?

 

I think It's pulling off the valve cover and returning up in to the intake before the intercooler. I'm still trying o figure out how to get my hand in there to pull off the tubing and then where to install the can lol. I think alot of guys are throwing some sort of steel wool in to the can if there's no inner filters. The one I got has inner baffles to separate out the oil. I'll try to find the damn link, but its not the ADD W1.

 

On the SC the OEM hose is about 8" long with a few pre made bends. It goes to the back of the engine under the SC. It's a real pain to get to, it pulls off real easy, has just a spring clamp on it. It's low vacuum doesn't need to be all fancy and tight. The other end is right there low on the valve cover/crankcase. You can't miss it. I used thick fuel line 3/8" and just pushed it on the nipples. Been fine for 1.5 years now. I have the ADD 2, it has a internal baffle. It's mounted between the brake fluid canister and the fusebox.

Volcom, if you need more baffle material use a stainless steel wool, used to clean pots n pans....

 

Yeah I bought some super long needle nose so I can get to the spring cla ps for install and removal, I just need to get around to doing it lol. I wanna say I'm ok with not needing any more baffling, IIRC the one I bought already has internal baffles to prevent spillover. I'm kind of holding off on engine bay mods for the moment until my LT is installed and I can relocate my battery to the bed so I free up more space in the bay for install stuff

 

Which year model engine are you installing this on?

 

Anyone using those catch cans made by Moroso ???