Keystone State Thread

@HomerTaco got any pics of the cab mount chop you did? After the 33s I want to get 35s

 

Not handy but I can snap one for you... Hang on a sec.

 

Service with a

 

Here you go:



There's not much left.

 

Once it's aligned properly it hardly rubs at all.

 

Thank you sir. That doesn't look like it's much more than the chop for 33s

 

It's about 1/2" more that what I did on Bryan's truck for his 285's. Also my firewall and pinchweld are molested harder than an altar boy. -_-

 

I finished beating the pinch weld today. I guess the days of grinding will never be done.

 

I got 285/75/16 and they did the same. I was hoping spacers would help but now the hit anytime its at full turn. If I didn't use red lock tite I'd consider removing them.

 

Someday I'll still need to chop the mounts so it might as well be this week.

 

Cab chop is on my to do list as well....maybe we should get a chop day organized

 

I've done a few...
Pretty easy with a good angle grinder.

 

I'm pretty talented with a grinder, not so much with a welder

 

I need to redo mine. I'm far from being a good welder esp in the vertical. But I cut too much off for the plates I welded in so I have a few gaps.

 

originally from georgia but relocated here to PA in Oct. 2015 for family reasons. i live in Wyalusing now.

 

Welcome!

You're way up there!

 

yep. endless mountains country.

 

Jelly...
My folks have a place up at lake wallenpaupac - love that area.

 

I have a 4.5" grinder is that what everyone uses to do the chop or should I buy a 7 in to make a single cut?

 

4.5 will do just fine.