1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Looking for a smoother ride Icon Delta Joint Upper Control Arm Grease Issue - Grease Gun and Nipple Adapter Replacing Control Arms & Brakes @ 161K, what else should I do while it's torn apart? OME Coil and Leaf Spring Questions Are OME rear shocks long enough for all pro expo's? Stock Leaf Springs

Maxtrac Spindle Lift for 2nd Gen Prerunners

Discussion in 'Suspension' started by markmatters, Feb 11, 2012.

Page 391 of 687
  1. May 2, 2016 at 7:14 PM
    #7801
    hyper86z

    #7801
    hyper86z Active Member

    Joined:
    Apr 18, 2013
    Member:
    #102370
    Messages:
    29
    Gender:
    Male
    First Name:
    Andy
    Cerritos, CA
    Vehicle:
    2012 PreRunner DCLB
    Maxtrac spindle 4" 2.0 fox coilover 2" All pro expo leaf pack 4"
    Today i went to go get alignment done.
    They said the spec is good but when i go straight my steering wheel was tilted to right side.. So i went back and they couldnt get it done right.
    Do you have any suggestion?
    Camber -0.1 1.2
    Caster 1.7 1.1
    Toe 0.05 0.04
    Are the spec for acess cab and double cab different?
     
    hyper86z, May 2, 2016
    #7801
  2. May 4, 2016 at 11:43 AM
    #7802
    Sexum

    #7802
    Sexum Well-Known Member

    Joined:
    Sep 16, 2014
    Member:
    #138469
    Messages:
    374
    Gender:
    Male
    First Name:
    Steven
    Pensacola, Florida
    Vehicle:
    '05 SWB DCSB Trd Sport
    33 inch Trail Grapplers 18x9 Fuel Hostages 30 inch 4d Optics Lightbar Weather tech floor liner Magna flow dual exhaust
    Does Headstrong have a coupon code for tacoma world members?
     
    Sexum, May 4, 2016
    #7802
  3. May 4, 2016 at 11:51 AM
    #7803
    SpruceTaco

    #7803
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,287
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    I don't believe so, since they already have the lowest price but I could be wrong.
     
    SpruceTaco, May 4, 2016
    #7803
    ChadsPride likes this.
  4. May 4, 2016 at 11:54 AM
    #7804
    SpruceTaco

    #7804
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,287
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    @Sexum you could try PM'ing Headstrong to find out, they're on the forum.
     
    SpruceTaco, May 4, 2016
    #7804
    Sexum likes this.
  5. May 4, 2016 at 12:51 PM
    #7805
    ensaladas

    #7805
    ensaladas DarthT8er

    Joined:
    Jul 13, 2015
    Member:
    #159346
    Messages:
    1,612
    Gender:
    Male
    Vehicle:
    ‘23 Trail Edition
    To those who have installed these, what was your initial opinion of the track widening in the front? I just received my SCS SR8s (17" w/ 4.3 BS) and I'm worried that they will stick out too much in the front. Has anyone done spindles with any SCS rims? I realize you can add a wheel spacer in the rear to compensate. Initially I was going to go the OME 885s or 887s, but now I'm leaning towards the Maxtracs, to keep my new factory components until later down the road when I want a little more lift. Thoughts?
     
    ensaladas, May 4, 2016
    #7805
  6. May 4, 2016 at 2:16 PM
    #7806
    SpruceTaco

    #7806
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,287
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    @Timbo89 is running SCS SR8's & Maxtracs.
    5e91d3c787a56af92164a0b4927bc4f5_badbb02ec499a1d3a7bcda8b52ba1a484525b17c.jpg
     
    SpruceTaco, May 4, 2016
    #7806
    TXAggieTRD likes this.
  7. May 4, 2016 at 5:08 PM
    #7807
    ensaladas

    #7807
    ensaladas DarthT8er

    Joined:
    Jul 13, 2015
    Member:
    #159346
    Messages:
    1,612
    Gender:
    Male
    Vehicle:
    ‘23 Trail Edition
    Yeah I stalk his and your trucks on this forum often hahah. His are 37s no? Running spacers in the front too?
     
    ensaladas, May 4, 2016
    #7807
    ChadsPride likes this.
  8. May 4, 2016 at 7:23 PM
    #7808
    SpruceTaco

    #7808
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,287
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    We're both running 35's & no spacers up front. I don't have SCS wheels but they are 17x9 with 4.5 backspace.
     
    SpruceTaco, May 4, 2016
    #7808
  9. May 5, 2016 at 3:38 AM
    #7809
    sgtnewundies

    #7809
    sgtnewundies Well-Known Member

    Joined:
    Apr 2, 2014
    Member:
    #126843
    Messages:
    649
    Gender:
    Male
    First Name:
    Eric
    Florida, Citrus County
    Vehicle:
    14 trd sport red
    Working on it now....UNDER CONSTRUCTION
    Couldn't be happier with the choice! So far I have put about 18000 miles on this setup and it has been a joy to drive.
     
    sgtnewundies, May 5, 2016
    #7809
  10. May 5, 2016 at 11:18 PM
    #7810
    hyper86z

    #7810
    hyper86z Active Member

    Joined:
    Apr 18, 2013
    Member:
    #102370
    Messages:
    29
    Gender:
    Male
    First Name:
    Andy
    Cerritos, CA
    Vehicle:
    2012 PreRunner DCLB
    Maxtrac spindle 4" 2.0 fox coilover 2" All pro expo leaf pack 4"
    Will i need a cb drop kit???

    image.jpg
     
    hyper86z, May 5, 2016
    #7810
  11. May 6, 2016 at 1:56 AM
    #7811
    BORNWILDGUY

    #7811
    BORNWILDGUY Well-Known Member

    Joined:
    Apr 30, 2012
    Member:
    #77942
    Messages:
    2,792
    Gender:
    Male
    First Name:
    Rich
    Florida
    Vehicle:
    2020 TACOMA TRD SPORT DCLB LIFTED W KDMAX-PRO XT TUNE
    FULLY LOADED WITH THE TECH PACKAGE, LEATHER, JBL, LED HEADLIGHTS, MOONROOF, EXTANG FULL TILT COVER, NFAB SIDE STEPS, OEM ROOF RACK, TRD PRO TAILS, WHITE RAPTOR LIGHTS, 15% TINT ALL THE WAY AROUND, BILSTEIN 6112'S W 650# SPRINGS AND 1/4 SPACER, ICON LEAF SPRINGS W 5125 REAR SHOCKS, 18 x 9 -12 Weld Racing Ledge 6 wheels w 275/65r18 Toyo AT III tires
    You need a driveshaft spacer to push it back where it was at stock .

    2313.jpg
    255.jpg
     
    BORNWILDGUY, May 6, 2016
    #7811
    hyper86z[QUOTED], SpruceTaco and ChadsPride like this.
  12. May 6, 2016 at 3:13 PM
    #7812
    Supra4x4

    #7812
    Supra4x4 IG: hash_brown55

    Joined:
    May 8, 2015
    Member:
    #154861
    Messages:
    3,231
    Gender:
    Male
    First Name:
    Andrew
    SoCal
    Vehicle:
    MGM 2011 DCLB 4X4 Long Travel'd
    Whole lotta stuff
    For those of you that have purchased the All Pro Expo leafs, where did you purchase in the end? Straight from all pro or from another merchant?

    And where did you find the drive line spacers as well? I assume the size of the spacer varies from truck to truck.
     
    Supra4x4, May 6, 2016
    #7812
  13. May 6, 2016 at 3:17 PM
    #7813
    SpruceTaco

    #7813
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,287
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    My expos came straight from All Pro, when you say driveline spacer I assume you mean driveshaft spacer. That came from 4-crawler offroad.
    http://www.4crawler.com/4x4/ForSale/DriveshaftSpacer.shtml
     
    SpruceTaco, May 6, 2016
    #7813
    hyper86z likes this.
  14. May 6, 2016 at 3:51 PM
    #7814
    Supra4x4

    #7814
    Supra4x4 IG: hash_brown55

    Joined:
    May 8, 2015
    Member:
    #154861
    Messages:
    3,231
    Gender:
    Male
    First Name:
    Andrew
    SoCal
    Vehicle:
    MGM 2011 DCLB 4X4 Long Travel'd
    Whole lotta stuff
    Yes indeed! Thanks.

    I'ma be going to Maxtracs and All pro Expos within the next few months. Pros of being 2wd.:D
     
    Supra4x4, May 6, 2016
    #7814
    TommyG, ChadsPride, hyper86z and 1 other person like this.
  15. May 7, 2016 at 7:31 AM
    #7815
    TommyG

    #7815
    TommyG Around

    Joined:
    Jul 25, 2010
    Member:
    #40725
    Messages:
    2,283
    Gender:
    Male
    First Name:
    Grouch
    MELTING POT
    Vehicle:
    21 MAX
    No mods
    Maxtracs going strong

     
    TommyG, May 7, 2016
    #7815
    SpruceTaco and ChadsPride like this.
  16. May 8, 2016 at 6:34 PM
    #7816
    BigOlBish

    #7816
    BigOlBish Member

    Joined:
    May 4, 2016
    Member:
    #186069
    Messages:
    22
    Gender:
    Male
    First Name:
    Jake
    Vehicle:
    2005 White AC TRD OR 2wd
    4" Max Trac Spindle 2" leaf block
    Ordered and received my spindle lift and also 2" block for the rear. The spindles specify you need 17" rims in the front but some of you in here are running 16s, is there a certain backspace you need to run 16s or just depends on the rims? Also anyone running method rims? Looking at some 17x9 -12/4.5" and was curious to see how they fit.
     
    BigOlBish, May 8, 2016
    #7816
  17. May 8, 2016 at 6:44 PM
    #7817
    Alfuh

    #7817
    Alfuh It's pronounced alpha

    Joined:
    Aug 21, 2013
    Member:
    #110878
    Messages:
    6,759
    Gender:
    Male
    First Name:
    Chris
    Bismarck, North Dakota
    Vehicle:
    2006 Prerunner
    I have a few mods
    you NEED 4.5" or LESS backspacing for 16s. I have 16x8s with 0 offset and 4.5" BS and mine clear the spindles. granted right now I have 2" wheel spacers all around, but I ran for several months without them and they cleared. barely....but they cleared lol

    IMG_1300.jpg
    IMG_1302.jpg
     
    Alfuh, May 8, 2016
    #7817
    ChadsPride likes this.
  18. May 10, 2016 at 6:39 AM
    #7818
    zimm52

    #7818
    zimm52 Well-Known Member

    Joined:
    Feb 19, 2010
    Member:
    #31664
    Messages:
    611
    Gender:
    Male
    sneakin up behind you
    Vehicle:
    2010 PreRunner TRD Off Road
    nothing yet!
    Finally got the truck paid off, now its time to get this set up. Im looking to get the 4 inch lift, 17x9 rims and trying to run 295/70/17 . With your knowledge, would there be any rubbing issues with that tire size and rim combo? Thank you.

    Or would i be better off running my stock TRD rims (which I like) 1.25" spacers all around and 285's?
     
    Last edited: May 10, 2016
    zimm52, May 10, 2016
    #7818
    ChadsPride likes this.
  19. May 10, 2016 at 7:25 PM
    #7819
    Dr3w

    #7819
    Dr3w Well-Known Member

    Joined:
    Nov 12, 2014
    Member:
    #142205
    Messages:
    830
    Gender:
    Male
    First Name:
    Drew
    805
    Vehicle:
    2007 White DCSB Sport
    For those of you running expo leaf packs, I have 10" fox shocks (ext:25.19", coll:15.19") will I run into any problems with these? I have gotten some mixed responses
     
    Dr3w, May 10, 2016
    #7819
  20. May 11, 2016 at 7:22 AM
    #7820
    2nd screen name

    #7820
    2nd screen name Tacodelaplaya

    Joined:
    Nov 17, 2015
    Member:
    #169943
    Messages:
    286
    Gender:
    Male
    First Name:
    Bob
    LV/SD
    Vehicle:
    06 AC Sport Prerunner
    Front: Maxtrac, DK heim UCA, 6112 Rear: AP expos, Fox 2.5 RR DSC Fn fivestar with General reds
    It probably will limit flex but the collapsed length is smaller than needed so you should be able to run them in most situations safely
     
    2nd screen name, May 11, 2016
    #7820
Page 391 of 687
To Top