Custom Headache Rack

Rack I built for a Toyota Tacoma 6' Bed on a 2005 to current. Fully T.I.G welded 2.5" square tubing .125 wall steel. the truck rack mounts into the factory tie down track on the bed rails and still lets you utilize the factory adjustable position tie down mounts. The center is 1 inch cat walk and is welded entirely to the rack. Hook and tie into anywhere on it and your load is secure, Plus You could throw anything at this rack and not bend dent or break this thing. The Bed rail is 1" x 1" angle welded to protect the top of the bed sides as well as add rigidity. custom gusset is welded in the I machined the two aluminum spikes that are mounted in the top of each side as a retainer for lumber and or custom look, they're installed with set screws if you want or need to remove them. It gets a lot of compliments. i have installed 2 Rigid LED diffused flood lamps. wiring is external but can easily be plumbed through the rack. The lights are mounted flush to the face of the window protector and they can they can come with the rack if wanted.

 

gotta throw a price in there man

 

$1,000 with lights

 

cool just asked cus someone was going to

GLWS

 

I just finished mine up, now waiting for the lights to come in