Finally Lifted with beilstein and OME 885s

. I'll be adding the ecgs bushing to the list. I'm a 2009 and who knows what kind of stuff ill run into lifting my truck. this site is going to make me go broke..lol

 

Are the vibes only on 2011 and older models? This lift is fairly modest so the suspension geometry hasn't changed too much. The UCA's help dial in alignment properly, I'm thinking that helps with unwanted vibrations.

 

I installed toytecc 3in 5100 all round and add a leaf and have a slight shutter vibration at 1500 rpm after a stop barely noticeable. I am installing the carrier barring drop and SPC control arms tomorrow hopefully that takes care of my issue.

I also installed the 1in front diff drop, Did you guys install the diff drop?

 

I did not install the diff drop.

 

Interesting.... I installed the front differ because it came with the toytech kit, if the UCA and carrier bearing does not fix the shutter I will see if removing the front diff drop will do the job.

Also I have a 2014 dcsb 4x4, TTHA-CK- 3" lift with bilstien 5100

 

How do you like the ride with the OME coils matched withed the bilstein on the front? Ive been considering this but have heard mixed opinions about this combo