3" lift and 35s??

I just got the ICON 3" coilovers/UCAS for my 99' standard cab/manual 3rz. It has 529 gears in it and 33x12.5s right now with no lift, rubs at full turn a little bit on the custom front bumper, little thicker/blockier at the bottom then it should be. So with this 3" lift/UCAS I was hoping I could run a 35x12.5 since it has the 529 gears in it already. I also have 10" wide wheels, not sure on backspacing but I think it's around 3.5" or so.

 

didnt you already asked this and already answered??

 

I have an extra cab with 33x1250s on a 10 in wheels with a 3 inch lift and they rub at full turn if I hit a bump. Don't know the offset or back spacing but alot of the tire sticks off the truck

 

Hey VirginaBound, I am finding myself in the same situation. I just ordered a 2" RB body lift for my truck. Did you have to do anything different for the 2" over a 1"? I don't see any instructions for the 2" on his site. Just a write up for the 1".