MARYLAND TACOMAS

Pretty sure it's 265/70/17s or 265/75/16s

 

Metric equivalent of a 31x10.5 is 265/70/16 which is stock on the TRD I believe.

 

i coulda sworn u can go slightly bigger. But I'll take ur word for it. Thanks

 

make sure you put anti-sieze between the bellhousing and block when you reassemble, the two metals making contact and corroding is probably why its stuck, and i bet the dowel pins are corroded too

 

265/65/17 (stock) can go to 265/70/17

265/70/16 (stock) can go to 265/75/17.

that's the 5% aspect ratio increase I mentioned on the last page

nominally, it's a very small increase, but if you're going from a stock size HT, to the slightly larger AT or MT, it will be a noticeable difference.

yeah, two of the bolt locations have extruded pieces on the steel block that go into the countersunk bolt holes on the transmission housing (aluminum). I know that's what's holding me up. 30 years of heating, cooling, and moisture, without every being taken apart. I'm going to buz off the aluminum oxidation from tranny housing, and buff the protrusions from the block. with a little antiseize before re-assembling, the housing should just fall off next time.

 

Fixed

 

Authority or duratrac?

265/70r17

Or 265/75r16

 

Thank you!

 

I may have The Beast sold to a guy in Virginia.

 

That's what I was looking for. Thank you.

MT/R and 265/75/16

 

You keeping the audi also?

 

They'll wear sooooooo fast

 

Just sold my Rincon to a guy from Prince Frederick.

 

I'm just selling stuff that i have sitting around and don't use. My CR500 & Harley Softail is next, and maybe that 04 tacoma TRD 4x4 i just bought. I want to have a 24x28 pole building/garage built here at my house so i need $14k, that's turn key with a 6inch concrete floor. I don't wanna make a loan, i rather just pay with cash. I have cars all over in other people's garages, this way i can have at least 2 of them here at my house.

 

Nah I'll be trading in the Audi. Piece of shit lol. Awesome car just needs too much.

 

Anyone here like to kayak? Looking for evening paddles either Eastern Shore or around Baltimore.

 

Not sure about about that area, but there is a Southern Maryland Paddlers group on FB.

 

I'm moving out of Baltimore City, but I'll be in Kingsville right at the gunpowder falls. I've got about 6 kayaks now so let me when what all water you want to hit up.

 

Glad you said it, not me lol

 

Finally picked up a transmission cooler today for the T4r hopefully I can find some time this weekend to install it