Today (Sat 11/12) Only!!! ECGS Front Diff. bearing/bushing removal tool and driver set

1. ECGS puller tool. Edges have been filed down for easier placement behind the bearing. Pulled my bearing GOOD.

2. Driver set. Get your new bushing seated evenly. Has multiple pieces for different applications. I only used the small one. Multi-colored pieces. Use it in your shop or use it to decorate your coffee table. Sure to turn a dull conversation about the relatives into a more appropriate one about your truck and how cool you are for doing your own work. "How many bushings and seals have you driven in evenly this month?"

3. INSTRUCTIONS. Oh yeah! Get it right the first time.

4. ECGS stickers. There are so many places that could use a good sticker. Be zen and you'll know when you find the right place for these 2.

$65 plus shipping

 

what bearing does this pull? lol

 

The notoriously bad front diff driver's side needle bearing.

https://www.tacomaworld.com/threads/1st-gen-4x4-front-diff-bearing-vibration.276853/

https://www.tacomaworld.com/threads/ecgs-front-diff-bearing.355983/

https://www.tacomaworld.com/threads...ing-install-fix-for-diff-bearing-vibe.251495/

http://www.toyota120.com/forum/showthread.php?t=21872&page=2

 

I figured if someone needed to change theirs, they would already know what the tool was. In any case I edited the title.

 

Rental before you sell

 

Sure, of course! I'll PM you.

 

would you sell the removal tool by itself?

 

PMed

 

Still available.

 

ttt

 

Removal tool available to purchase?

 

Still available.

 

Willing to part with just the removal tool?

 

I'd sell the removal tool by itself for $48 shipped.

 

i want to buy this.

but i cant because i have no location for the two stickers

 

Take a sharpie, go down to your local Toyota dealership, ask to use the bathroom in the service department, and write on the wall:

For a good time call: _______________

Place one there. And you still have one left.

 

bump

 

Is this install tool the same for 2nd gen? I see on their site they have the same picture of the tool but listed different for the 7.5" clam vs the 8" clam. Wonder if it's a different size or something.

 

The install tool is really a set of race drivers of all different sizes. Even so, I think the fitting for both 1st and 2nd gens is the same.

It's the removal tool that might be different for each generation. Mine's for 1st gen. with the 7.5" clamshell.

 

Yea sorry I meant removal tool. It was early when I replied. I will reach out to ECGS and see if it's the same. If so I will be interested.